General Functions Syntax Listed by Product

Base SAS

A B C D E F G H I J K L M N O P Q R S T U V W Y Z

Name
Syntax and Description
ABS (argument)
Returns the absolute value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ADDR(variable)
Returns the memory address of a variable on a 32-bit platform.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ADDRLONG(variable)
Returns the memory address of a variable on 32-bit and 64-bit platforms.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
AIRY(x)
Returns the value of the Airy function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ALLCOMB(count, k, variable-1, … , variable-n)
Generates all combinations of the values of variables taken at a time in a minimal change order.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ALLPERM(count, variable-1 <,variable-2 …> )
Generates all permutations of the values of several variables in a minimal change order.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYALNUM(string <,start > )
Searches a character string for an alphanumeric character, and returns the first position at which the character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYALPHA(string <,start > )
Searches a character string for an alphabetic character, and returns the first position at which the character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYCNTRL(string <,start > )
Searches a character string for a control character, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYDIGIT(string <,start > )
Searches a character string for a digit, and returns the first position at which the digit is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYFIRST(string <,start > )
Searches a character string for a character that is valid as the first character in a SAS variable name under VALIDVARNAME=V7, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYGRAPH(string <,start > )
Searches a character string for a graphical character, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYLOWER(string <,start > )
Searches a character string for a lowercase letter, and returns the first position at which the letter is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYNAME(string <,start > )
Searches a character string for a character that is valid in a SAS variable name under VALIDVARNAME=V7, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYPRINT(string <,start > )
Searches a character string for a printable character, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYPUNCT(string <,start > )
Searches a string for a punctuation character and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
ANYPUNCT(string <,start > )
Searches a character string for a punctuation character, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYSPACE(string <,start > )
Searches a character string for a white-space character (blank, horizontal and vertical tab, carriage return, line feed, and form feed), and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYUPPER(string <,start > )
Searches a character string for an uppercase letter, and returns the first position at which the letter is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ANYXDIGIT(string <,start > )
Searches a character string for a hexadecimal character that represents a digit, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ARCOS (argument)
Returns the arccosine.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ARCOSH(x)
Returns the inverse hyperbolic cosine.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ARSIN (argument)
Returns the arcsine.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ARSINH(x)
Returns the inverse hyperbolic sine.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ARTANH(x)
Returns the inverse hyperbolic tangent.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ATAN (argument)
Returns the arc tangent.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ATAN2(argument-1, argument-2)
Returns the arc tangent of the ratio of two numeric variables.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ATTRC(data-set-id,attr-name)
Returns the value of a character attribute for a SAS data set.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ATTRN(data-set-id,attr-name)
Returns the value of a numeric attribute for a SAS data set.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
band(argument-1,argument-2)
Returns the bitwise logical AND of two arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BETA(a,b)
Returns the value of the beta function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BETAINV (p,a,b)
Returns a quantile from the beta distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BLACKCLPRC(E, t, F, r, sigma)
Calculates call prices for European options on futures, based on the Black model.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BLACKPTPRC(E, t, F, r, sigma)
Calculates put prices for European options on futures, based on the Black model.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BLKSHCLPRC(E, t, S, r, sigma)
Calculates call prices for European options on stocks, based on the Black-Scholes model.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BLKSHPTPRC(E, t, S, r, sigma)
Calculates put prices for European options on stocks, based on the Black-Scholes model.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BLSHIFT(argument-1,argument-2)
Returns the bitwise logical left shift of two arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BNOT(argument)
Returns the bitwise logical NOT of an argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BOR(argument-1,argument-2)
Returns the bitwise logical OR of two arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BRSHIFT(argument-1,argument-2)
Returns the bitwise logical right shift of two arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BXOR(argument-1, argument-2)
Returns the bitwise logical EXCLUSIVE OR of two arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
BYTE(n)
Returns one character in the ASCII collating sequence.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
BYTE(n)
Returns one character in the ASCII collating sequence.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
BYTE (n)
Returns one character in the ASCII or the EBCDIC collating sequence.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CALL SOUND(frequency,duration);
Generates a sound with a specific frequency and duration.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
CALL SYSTEM(command);
Submits an operating system command or a Windows application for execution.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
CAT(item-1 <, …, item-n > )
Does not remove leading or trailing blanks, and returns a concatenated character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CATQ(modifiers <, delimiter > , item-1 <, …, item-n > )
Concatenates character or numeric values by using a delimiter to separate items and by adding quotation marks to strings that contain the delimiter.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CATS(item-1 <, …, item-n > )
Removes leading and trailing blanks, and returns a concatenated character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CATT(item-1 <, … item-n > )
Removes trailing blanks, and returns a concatenated character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CATX(delimiter, item-1 <, … item-n > )
Removes leading and trailing blanks, inserts delimiters, and returns a concatenated character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CDF (distribution,quantile <,parm-1, … ,parm-k > )
Returns a value from a cumulative probability distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CEIL (argument)
Returns the smallest integer that is greater than or equal to the argument, fuzzed to avoid unexpected floating-point results.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CEILZ (argument)
Returns the smallest integer that is greater than or equal to the argument, using zero fuzzing.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CEXIST(entry <,'U'> )
Verifies the existence of a SAS catalog or SAS catalog entry.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CHAR(string, position)
Returns a single character from a specified position in a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CHOOSEC (index-expression, selection-1 <,…selection-n > )
Returns a character value that represents the results of choosing from a list of arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CHOOSEN (index-expression, selection-1 <,…selection-n > )
Returns a numeric value that represents the results of choosing from a list of arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CINV (p,df <,nc > )
Returns a quantile from the chi-square distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CLOSE(data-set-id)
Closes a SAS data set.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CMISS(argument-1 <, argument-2,…> )
Counts the number of missing arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CNONCT(x,df,prob)
Returns the noncentrality parameter from a chi-square distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COALESCE(argument-1<..., argument-n>)
Returns the first non-missing value from a list of numeric arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COALESCEC(argument-1 < ..., argument-n > )
Returns the first non-missing value from a list of character arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COLLATE(start-position <,end-position > ) | (start-position <,,length > )
Returns a character string in an ASCII collating sequence.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
COLLATE (start-position < ,end-position > )|(start-position <,,length > )
Returns an ASCII collating sequence character string.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
COLLATE (start-position <,end-position > ) | (start-position <,,length > )
Returns a character string in ASCII or EBCDIC collating sequence.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COMB(n,r)
Computes the number of combinations of elements taken at a time.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COMPARE(string–1, string–2 <,modifiers > )
Returns the position of the leftmost character by which two strings differ, or returns 0 if there is no difference.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COMPBL(source)
Removes multiple blanks from a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COMPFUZZ(value1, value2 <, fuzz <, scale > > )
Performs a fuzzy comparison of two numeric values.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COMPGED(string-1, string-2 <,cutoff > <,modifiers > )
Returns the generalized edit distance between two strings.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COMPLEV(string-1, string-2 <,cutoff > <,modifiers > )
Returns the Levenshtein edit distance between two strings.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COMPOUND(a,f,r,n)
Returns compound interest parameters.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COMPRESS(< source > <, chars > <, modifiers > )
Returns a character string with specified characters removed from the original string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CONSTANT(constant <, parameter > )
Computes machine and mathematical constants.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CONVX(y,f,c(1), ... ,c(k))
Returns the convexity for an enumerated cash flow.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CONVXP(A,c,n,K,k0 ,y)
Returns the convexity for a periodic cash flow stream, such as a bond.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COS (argument)
Returns the cosine.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COSH(argument)
Returns the hyperbolic cosine.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COUNT(string,substring <,modifiers > )
Counts the number of times that a specified substring appears within a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COUNTC(string, charlist <,modifiers > )
Counts the number of characters in a string that appear or do not appear in a list of characters.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
COUNTW(< string > <, chars > <, modifiers > )
Counts the number of words in a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CSS(argument-1 <,...argument-n > )
Returns the corrected sum of squares.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CUMIPMT (rate, number-of-periods, principal-amount, < start-period >, < end-period >, < type >)
Returns the cumulative interest paid on a loan between the start and end period.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CUMPRINC (rate, number-of-periods, principal-amount, < start-period >, < end-period >, < type >)
Returns the cumulative principal paid on a loan between the start and end period.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CUROBS(data-set-id)
Returns the observation number of the current observation.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CV(argument-1,argument-2 <,...argument-n > )
Returns the coefficient of variation.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DACCDB(p,v,y,r)
Returns the accumulated declining balance depreciation.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DACCDBSL(p,v,y,r)
Returns the accumulated declining balance with conversion to a straight-line depreciation.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DACCSL(p,v,y)
Returns the accumulated straight-line depreciation.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DACCSYD(p,v,y)
Returns the accumulated sum-of-years-digits depreciation.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DACCTAB(p,v,t1, . . . ,tn)
Returns the accumulated depreciation from specified tables.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DAIRY(x)
Returns the derivative of the AIRY function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DATDIF(sdate,edate,basis)
Returns the number of days between two dates after computing the difference between the dates according to specified day count conventions.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DATE()
Returns the current date as a SAS date value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DATEJUL(julian-date)
Converts a Julian date to a SAS date value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DATEPART(datetime)
Extracts the date from a SAS datetime value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DATETIME()
Returns the current date and time of day as a SAS datetime value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DAY(date)
Returns the day of the month from a SAS date value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DCLOSE(directory-id)
Closes a directory that was opened by the DOPEN function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DCREATE(directory-name <,parent-directory > )
Returns the complete pathname of a new, external directory.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DEPDB(p,v,y,r)
Returns the declining balance depreciation.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DEPDBSL(p,v,y,r)
Returns the declining balance with conversion to a straight-line depreciation.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DEPSL(p,v,y)
Returns the straight-line depreciation.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DEPSYD(p,v,y)
Returns the sum-of-years-digits depreciation.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DEPTAB(p,v,t1,...,tn)
Returns the depreciation from specified tables.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DEQUOTE(string)
Removes matching quotation marks from a character string that begins with a quotation mark, and deletes all characters to the right of the closing quotation mark.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DEVIANCE(distribution, variable, shape-parameters <,ε > )
Returns the deviance based on a probability distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DHMS(date,hour,minute,second)
Returns a SAS datetime value from date, hour, minute, and second values.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DIF < n > (argument)
Returns differences between an argument and its th lag.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DIGAMMA(argument)
Returns the value of the digamma function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DIM < n > (array-name)
DIM(array-name,bound-n)
Returns the number of elements in an array.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DINFO(directory-id, info-item)
Returns information about a directory.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
DINFO(directory-id, info-item)
Returns information about a directory.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
DINFO(directory-id, info-item)
Returns information about a directory.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
DINFO(directory-id,info-item)
Returns information about a directory.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DIVIDE(x, y)
Returns the result of a division that handles special missing values for ODS output.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DNUM(directory-id)
Returns the number of members in a directory.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DOPEN(fileref)
Opens a directory, and returns a directory identifier value.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
DOPEN(“fileref”)
Opens a directory and returns a directory identifier value.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
DOPEN(fileref)
Opens a directory and returns a directory identifier value.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
DOPEN(fileref)
Opens a directory, and returns a directory identifier value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DOPTNAME(directory-id, nval)
Returns directory attribute information.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
DOPTNAME(directory-id, nval )
Returns the name of a directory information item.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
DOPTNAME(directory-id,nval)
Returns the name of a directory information item.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
DOPTNAME(directory-id,nval)
Returns directory attribute information.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DOPTNUM(directory-id)
Returns the number of information items that are available for a directory.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
DOPTNUM(directory-id)
Returns the number of information items that are available for a directory.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
DOPTNUM(directory-id)
Returns the number of information items that are available for a directory.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
DOPTNUM(directory-id)
Returns the number of information items that are available for a directory.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DREAD(directory-id,nval)
Returns the name of a directory member.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DROPNOTE( data-set-id | file-id ,note-id)
Deletes a note marker from a SAS data set or an external file.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DSNAME(data-set-id)
Returns the SAS data set name that is associated with a data set identifier.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DSNCATLGD(filename)
Verifies the existence of an external file in the z/OS system catalog by its physical name.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
DUR(y,f,c(1), ... ,c(k))
Returns the modified duration for an enumerated cash flow.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
DURP(A,c,n,K,k0 ,y)
Returns the modified duration for a periodic cash flow stream, such as a bond.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
EFFRATE(compounding-interval, rate)
Returns the effective annual interest rate.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ENCODCOMPAT(source1,<source2>)
Verifies the transcoding compatibility between two encodings.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
ENCODISVALID(source)
specifies a valid encoding name.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
ENVLEN(argument)
Returns the length of an environment variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ERF(argument)
Returns the value of the (normal) error function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ERFC(argument)
Returns the value of the complementary (normal) error function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
EUCLID(value-1 <,value-2 ... > )
Returns the Euclidean norm of the nonmissing arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
EUROCURR(from-currency-amount, from-currency-code, to-currency-code)
Converts one European currency to another.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
EXIST(member-name <,member-type <, generation > > )
Verifies the existence of a SAS library member.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
EXP(argument)
Returns the value of the exponential function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FACT(n)
Computes a factorial.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FAPPEND(file-id <,cc > )
Appends the current record to the end of an external file.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FCLOSE(file-id)
Closes an external file, a directory, or a directory member.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
FCLOSE(file-id)
Closes an external file, directory, or directory member.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FCOL(file-id)
Returns the current column position in the File Data Buffer (FDB).
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FDELETE(“fileref”)
Deletes an external file or an empty directory.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
FDELETE(“fileref”)
Deletes an external file or an empty directory.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
FDELETE (fileref)
Deletes an external file or an empty directory.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
FDELETE( fileref | directory )
Deletes an external file or an empty directory.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FETCH(data-set-id <,'NOSET'> )
Reads the next non-deleted observation from a SAS data set into the Data Set Data Vector (DDV).
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FETCHOBS(data-set-id,obs-number <,options > )
Reads a specified observation from a SAS data set into the Data Set Data Vector (DDV).
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FEXIST(fileref)
Verifies the existence of an external file that is associated with a fileref.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
FEXIST(“fileref”)
Verifies the existence of an external file by its fileref.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
FEXIST(fileref)
Verifies the existence of an external file associated with a fileref.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
FEXIST(fileref)
Verifies the existence of an external file that is associated with a fileref.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FGET(file-id,variable <,length > )
Copies data from the File Data Buffer (FDB) into a variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FILEEXIST(filename)
Verifies the existence of an external file by its physical name.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
FILEEXIST(“filename”)
Verifies the existence of an external file by its physical name.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
FILEEXIST(filename)
Verifies the existence of an external file by its physical name.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
FILEEXIST(file-name)
Verifies the existence of an external file by its physical name.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FILENAME(fileref, filename <,device-type<,“host-options”<,dir-ref>>>)
Assigns or deassigns a fileref for an external file, directory, or output device.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
FILENAME (“fileref”, “filename” <,device-type<,host-options<,dir-ref>>>)
Assigns or deassigns a fileref for an external file, directory, or output device.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
FILENAME(fileref,filename <,device <,host-options > > )
Assigns or deassigns a fileref for an external file, a directory, or an output device.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
FILENAME(fileref <,file-name > <,device-type > <,'host-options'> <,dir-ref > )
Assigns or deassigns a fileref to an external file, directory, or output device.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FILEREF(fileref)
Verifies whether a fileref has been assigned for the current SAS session.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
FILEREF(“fileref”)
Verifies that a fileref has been assigned for the current SAS session.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
FILEREF(fileref)
Verifies that a fileref has been assigned for the current SAS session.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
FILEREF(fileref)
Verifies whether a fileref has been assigned for the current SAS session.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FINANCE(string-identifier, parm1, parm2,…)
Computes financial calculations such as depreciation, maturation, accrued interest, net present value, periodic savings, and internal rates of return.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FIND(string,substring <,modifiers > <,startpos > )
FIND(string,substring <,startpos > <,modifiers > )
Searches for a specific substring of characters within a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FINDC(string <, charlist > )
FINDC(string, charlist <,modifiers > )
FINDC(string, charlist, modifier(s) <, startpos > )
FINDC(string, charlist, < startpos > , < modifiers)>
Searches a string for any character in a list of characters.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FINDW(string, word <, chars > )
FINDW(string, word, chars, modifiers <, startpos > )
FINDW(string, word, chars, startpos <, modifiers > )
FINDW(string, word, startpos <, chars <, modifiers > > )
Returns the character position of a word in a string, or returns the number of the word in a string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FINFO(file-id, info-item)
Returns the value of a file information item for an external file.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
FINFO(file-id, info-item)
Returns the value of an information item for an external file.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
FINFO(file-id,info-item)
Returns the value of a file information item for an external file.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
FINFO(file-id,info-item)
Returns the value of a file information item.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FINV (p, ndf, ddf <,nc > )
Returns a quantile from the distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FIPNAME(expression)
Converts two-digit FIPS codes to uppercase state names.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FIPNAMEL(expression)
Converts two-digit FIPS codes to mixed case state names.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FIPSTATE(expression)
Converts two-digit FIPS codes to two-character state postal codes.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FIRST(string)
Returns the first character in a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FLOOR (argument)
Returns the largest integer that is less than or equal to the argument, fuzzed to avoid unexpected floating-point results.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FLOORZ (argument)
Returns the largest integer that is less than or equal to the argument, using zero fuzzing.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FNONCT(x,ndf,ddf,prob)
Returns the value of the noncentrality parameter of an F distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FNOTE(file-id)
Identifies the last record that was read, and returns a value that the FPOINT function can use.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FOPEN(fileref <,open-mode <,record-length <,record-format > > > )
Opens an external file and returns a file identifier value.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
FOPEN(fileref <,open-mode <,record-length <,record-format > > > )
Opens an external file and returns a file identifier value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FOPTNAME(file-id, nval)
Returns the name of an item of information about an external file.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
FOPTNAME(file-id, nval)
Returns the name of an information item for an external file.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
FOPTNAME(file-id,nval)
Returns the name of an information item for an external file.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
FOPTNAME(file-id,nval)
Returns the name of an item of information about a file.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FOPTNUM(file-id)
Returns the number of information items that are available for an external file.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
FOPTNUM(file-id)
Returns the number of information items that are available for a file.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
FOPTNUM(file-id)
Returns the number of information items that are available for an external file.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
FOPTNUM(file-id)
Returns the number of information items that are available for an external file.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FPOINT(file-id,note-id)
Positions the read pointer on the next record to be read.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FPOS(file-id,nval)
Sets the position of the column pointer in the File Data Buffer (FDB).
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FPUT(file-id,cval)
Moves data to the File Data Buffer (FDB) of an external file, starting at the FDB's current column position.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FREAD(file-id)
Reads a record from an external file into the File Data Buffer (FDB).
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FREWIND(file-id)
Positions the file pointer to the start of the file.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FRLEN(file-id)
Returns the size of the last record that was read, or, if the file is opened for output, returns the current record size.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FSEP(file-id,characters <,'x' | 'X' > )
Sets the token delimiters for the FGET function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FUZZ(argument)
Returns the nearest integer if the argument is within 1E−12 of that integer.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
FWRITE(file-id <,cc > )
Writes a record to an external file.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GAMINV(p,a)
Returns a quantile from the gamma distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GAMMA(argument)
Returns the value of the gamma function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GARKHCLPRC(E, t, S, Rd , Rf , sigma)
Calculates call prices for European options on stocks, based on the Garman-Kohlhagen model.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GARKHPTPRC(E, t, S, Rd , Rf , sigma)
Calculates put prices for European options on stocks, based on the Garman-Kohlhagen model.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GCD(x1, x2, x3, …, xn)
Returns the greatest common divisor for one or more integers.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GEODIST(latitude-1, longitude-1, latitude-2, longitude-2 <,options > )
Returns the geodetic distance between two latitude and longitude coordinates.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GEOMEAN(argument <,argument,…> )
Returns the geometric mean.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GEOMEANZ(argument <,argument,…> )
Returns the geometric mean, using zero fuzzing.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GETLOCENV( )
Returns the current locale/language environment.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
GETOPTION(option-name <, return-value-option > < return-value-formatting-options >)
Returns the value of a SAS system or graphics option.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GETOPTION(option-name <, return-value-option > < return-value-formatting-options >)
Returns the value of a SAS system or graphics option.
Product: Base SAS
Document: SAS 9.3 System Options: Reference
GETPXLANGUAGE()
Returns the current two-letter language code.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
GETPXLOCALE(<source>)
Returns the POSIX locale value for a SAS locale.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
GETPXREGION()
Returns the current two-letter region code.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
GETVARC(data-set-id,var-num)
Returns the value of a SAS data set character variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GETVARN(data-set-id,var-num)
Returns the value of a SAS data set numeric variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
GRAYCODE(k, numeric-variable-1, ..., numeric-variable-n)
GRAYCODE(k, character-variable <, n <, in-out > > )
Generates all subsets of items in a minimal change order.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
HARMEAN(argument <,argument,…> )
Returns the harmonic mean.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
HARMEANZ(argument <,argument,…> )
Returns the harmonic mean, using zero fuzzing.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
HBOUND < n > (array-name)
HBOUND(array-name,bound-n)
Returns the upper bound of an array.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
HMS(hour,minute,second)
Returns a SAS time value from hour, minute, and second values.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
HOLIDAY('holiday', year)
Returns a SAS date value of a specified holiday for a specified year.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
HOUR( time | datetime )
Returns the hour from a SAS time or datetime value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
HTMLDECODE(expression)
Decodes a string that contains HTML numeric character references or HTML character entity references, and returns the decoded string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
HTMLENCODE(expression, < options >)
Encodes characters using HTML character entity references, and returns the encoded string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
IBESSEL(nu,x,kode)
Returns the value of the modified Bessel function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
IFC(logical-expression, value-returned-when-true, value-returned-when-false
<,value-returned-when-missing > )
Returns a character value based on whether an expression is true, false, or missing.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
IFN(logical-expression, value-returned-when-true, value-returned-when-false
<,value-returned-when-missing > )
Returns a numeric value based on whether an expression is true, false, or missing.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INDEX(source,excerpt)
Searches a character expression for a string of characters, and returns the position of the string's first character for the first occurrence of the string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INDEXC(source,excerpt-1 <,… excerpt-n > )
Searches a character expression for any of the specified characters, and returns the position of that character.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INDEXW(source,excerpt <,delimiters > )
Searches a character expression for a string that is specified as a word, and returns the position of the first character in the word.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INPUT(source,< ? | ?? >,informat.)
Returns the value that is produced when SAS converts an expression using the specified informat.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INPUTC(source, informat <,w > )
Enables you to specify a character informat at run time.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INPUTN(source, informat <,w <,d > > )
Enables you to specify a numeric informat at run time.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INT(argument)
Returns the integer value, fuzzed to avoid unexpected floating-point results.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTCINDEX(interval < < multiple.< shift-index > > > , date-time-value)
Returns the cycle index when a date, time, or datetime interval and value are specified.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTCK(interval < multiple > < .shift-index >, start-date, end-date, <'method'> )
INTCK(custom-interval, start-date, end-date, <'method'> )
Returns the number of interval boundaries of a given kind that lie between two dates, times, or datetime values.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTCYCLE(interval < < multiple.< shift-index > > >, < seasonality >)
Returns the date, time, or datetime interval at the next higher seasonal cycle when a date, time, or datetime interval is specified.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTFIT(argument-1, argument-2, 'type')
Returns a time interval that is aligned between two dates.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTFMT(interval < < multiple.< .shift-index > > > , 'size')
Returns a recommended SAS format when a date, time, or datetime interval is specified.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTGET(date-1, date-2, date-3)
Returns a time interval based on three date or datetime values.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTINDEX(interval < < multiple.< shift-index > > >, date-value, < seasonality >)
Returns the seasonal index when a date, time, or datetime interval and value are specified.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTNX(interval < multiple > < .shift-index > , start-from, increment <, 'alignment'> )
INTNX(custom-interval, start-from, increment <, 'alignment'> )
Increments a date, time, or datetime value by a given time interval, and returns a date, time, or datetime value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTRR(freq,c0, c1,..., cn)
Returns the internal rate of return as a fraction.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTSEAS(interval < < multiple.< shift-index > > > < seasonality >)
Returns the length of the seasonal cycle when a date, time, or datetime interval is specified.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTSHIFT(interval < < multiple.< shift-index > > > )
Returns the shift interval that corresponds to the base interval.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTTEST(interval < < multiple.< shift-index > > > )
Returns 1 if a time interval is valid, and returns 0 if a time interval is invalid.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
INTZ (argument)
Returns the integer portion of the argument, using zero fuzzing.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
IORCMSG()
Returns a formatted error message for _IORC_.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
IPMT (rate, period, number-of-periods, principal-amount, < future-amount >, < type >)
Returns the interest payment for a given period for a constant payment loan or the periodic savings for a future balance.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
IQR(value-1 <,value-2...> )
Returns the interquartile range.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
IRR(freq c0,c1,…,cn)
Returns the internal rate of return as a percentage.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
JBESSEL(nu,x)
Returns the value of the Bessel function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
JULDATE(date)
Returns the Julian date from a SAS date value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
JULDATE7(date)
Returns a seven-digit Julian date from a SAS date value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
KCOMPARE(source,< pos, < count,> > findstr)
Returns the result of a comparison of character expressions.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KCOMPRESS(source,< characters-to-remove > )
Removes specified characters from a character expression.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KCOUNT(source)
Returns the number of double-byte characters in an expression.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KCVT(text, intype, outtype, < options,…> )
Converts data from one type of encoding data to another encoding data.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KINDEX(source, excerpt)
Searches a character expression for a string of characters.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KINDEXC(source,excerpt-1 <,… excerpt-n > )
Searches a character expression for specified characters.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KLEFT(argument)
Left-aligns a character expression by removing unnecessary leading DBCS blanks and SO/SI.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KLENGTH(argument)
Returns the length of an argument.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KLOWCASE(argument)
Converts all letters in an argument to lowercase.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
str=KPROPCASE(< instr > , (<options> ))
Converts Chinese, Japanese, Korean, Taiwanese (CJKT) characters.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
str=KPROPCHAR(< instr > )
Converts special characters to normal characters.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
str=KPROPDATA(< instr > (<option, input encode name, output encode name> ))
Removes or converts unprintable characters.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KREVERSE(argument)
Reverses a character expression.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KRIGHT(argument)
Right-aligns a character expression by trimming trailing DBCS blanks and SO/SI.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KSCAN(argument,n <, delimiters > )
Selects a specified word from a character expression.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KSTRCAT(argument-1, argument-2 <, … argument-n > )
Concatenates two or more character expressions.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KSUBSTR(argument,position <,n > )
Extracts a substring from an argument.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KSUBSTRB(argument,position <,n > )
Extracts a substring from an argument according to the byte position of the substring in the argument.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KTRANSLATE(source, to-1, from-1 <...to-n, from-n >)
Replaces specific characters in a character expression.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
KTRANSLATE(source,to-1,from-1 <,…to-n,from-n > )
Replaces specific characters in a character expression.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KTRIM(argument)
Removes trailing DBCS blanks and SO/SI from character expressions.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KTRUNCATE(argument, number, length)
Truncates a string to a specified length in byte unit without breaking multibyte characters.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KUPCASE(argument)
Converts all letters in an argument to uppercase.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KUPDATE(argument,position,n <, characters-to-replace > )
KUPDATE(argument,position <,n > , characters-to-replace)
Inserts, deletes, and replaces character value contents.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KUPDATEB(argument,position,n <,characters-to-replace > )
KUPDATEB(argument,position <, n > , characters-to-replace)
Inserts, deletes, and replaces the contents of the character value according to the byte position of the character value in the argument.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
KURTOSIS(argument-1,argument-2,argument-3,argument-4 <,…,argument-n > )
Returns the kurtosis.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
KVERIFY(source,excerpt-1 <,…excerpt-n > )
Returns the position of the first character that is unique to an expression.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
LAG < n > (argument)
Returns values from a queue.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LARGEST (k, value-1 <, value-2 ...> )
Returns theth largest non-missing value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LBOUND < n > (array-name)
LBOUND(array-name,bound-n)
Returns the lower bound of an array.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LCM(x1,x2,x3, …, xn)
Returns the least common multiple.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LCOMB(n,r)
Computes the logarithm of the COMB function, which is the logarithm of the number of combinations of objects taken at a time.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LEFT(argument)
Left-aligns a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LENGTH(string)
Returns the length of a non-blank character string, excluding trailing blanks, and returns 1 for a blank character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LENGTHC(string)
Returns the length of a character string, including trailing blanks.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LENGTHM(string)
Returns the amount of memory (in bytes) that is allocated for a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LENGTHN(string)
Returns the length of a character string, excluding trailing blanks.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LEXCOMB(count, k, variable-1, …, variable-n)
Generates all distinct combinations of the non-missing values of variables taken at a time in lexicographic order.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LEXCOMBI(n, k, index-1, …, k)
Generates all combinations of the indices of objects taken at a time in lexicographic order.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LEXPERK(count, k, variable-1, …, variable-n)
Generates all distinct permutations of the non-missing values of variables taken at a time in lexicographic order.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LEXPERM(count, variable-1 <, …, variable-N > )
Generates all distinct permutations of the non-missing values of several variables in lexicographic order.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LFACT(n)
Computes the logarithm of the FACT (factorial) function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LGAMMA(argument)
Returns the natural logarithm of the Gamma function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LIBNAME(libref<,SAS-data-library<,engine<,options>>>)
Assigns or clears a libref for a SAS library.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
LIBNAME(libref <,SAS-library <,engine <,options > > > )
Assigns or deassigns a libref for a SAS library.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LIBREF(libref)
Verifies that a libref has been assigned.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LOG(argument)
Returns the natural (base e) logarithm.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LOG10(argument)
Returns the logarithm to the base 10.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LOG1PX(x)
Returns the log of 1 plus the argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LOG2(argument)
Returns the logarithm to the base 2.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LOG4SAS_APPENDER("name", "FileRefAppender", 'options')
Creates a fileref appender that can be referenced by a logger.
Product: Base SAS
Document: SAS 9.3 Logging: Configuration and Programming Reference
Log4SAS_logevent(name, level, message)
Logs a message by using a specific logger.
Product: Base SAS
Document: SAS 9.3 Logging: Configuration and Programming Reference
LOG4SAS_LOGGER("name", <"options"> )
Creates a logger.
Product: Base SAS
Document: SAS 9.3 Logging: Configuration and Programming Reference
LOGBETA(a,b)
Returns the logarithm of the beta function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LOGCDF('dist',quantile <,parm-1,...,parm-k > )
Returns the logarithm of a left cumulative distribution function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LOGPDF('dist',quantile,parm-1,...,parm-k)
Returns the logarithm of a probability density (mass) function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LOGSDF('dist',quantile,parm-1,...,parm-k)
Returns the logarithm of a survival function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LOWCASE(argument)
Converts all letters in an argument to lowercase.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LPERM(n <,r > )
Computes the logarithm of the PERM function, which is the logarithm of the number of permutations of objects, with the option of including number of elements.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
LPNORM(p, value-1 <,value-2 …> )
Returns the L norm of the second argument and subsequent non-missing arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MAD(value-1 <, value-2...> )
Returns the median absolute deviation from the median.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MARGRCLPRC(X1 , t, X2 , sigma1, sigma2, rho12)
Calculates call prices for European options on stocks, based on the Margrabe model.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MARGRPTPRC(X1 , t, X2 , sigma1, sigma2, rho12)
Calculates put prices for European options on stocks, based on the Margrabe model.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MAX(argument-1,argument-2 <,...argument-n > )
Returns the largest value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MCIPISLP(number-of-seconds)
Causes SAS to wait for a piece of multimedia equipment to become active.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
MCIPISTR(MCI-string-command)
Submits an MCI string command to a piece of multimedia equipment.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
MD5(string)
Returns the result of the message digest of a specified string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MDY(month,day,year)
Returns a SAS date value from month, day, and year values.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MEAN(argument-1 <,...argument-n > )
Returns the arithmetic mean (average).
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MEDIAN(value1 <, value2, ...> )
Returns the median value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
rc=METADATA_DELASSN(uri,assn);
Deletes all objects that make up the specified association.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_DELOBJ( uri );
Deletes the first object that matches the specified URI.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_GETATTR( uri , attr , value );
Returns the value of the specified attribute for the specified object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_GETNASL( uri , n , asn );
Returns the th association for the specified object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_GETNASN( uri , asn , n , nuri );
Returns the th associated object of the specified association.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_GETNATR( uri , n, attr, value);
Returns the th attribute of the specified object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_GETNOBJ(uri, n, nuri);
Returns theth object that matches the specified URI.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_GETNPRP(uri, n, prop, value);
Returns the th property of the specified object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_GETNTYP(n, type);
Returns the th object type on the server.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_GETPROP(uri, prop, value, propuri);
Returns the value and Uniform Resource Identifier (URI) of the specified property for the specified object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_NEWOBJ(type, uri <, name > <, repos > <, parent > <, asn >);
Creates a new metadata object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_PATHOBJ( proj, path, deftype, type, ID );
Returns the Id and Type attributes of the specified folder object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_PAUSED();
Determines whether the server specified by the METASERVER system option is paused.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_PURGE(< uri > );
Purges the specified URI.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_RESOLVE( uri, type, ID );
Resolves a URI into an object on the metadata server.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_SETASSN( uri, asn, mod, auri-1 <,...auri-n >);
Modifies an association list for an object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_SETATTR( uri, attr, value );
Sets the specified attribute for the specified object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METADATA_SETPROP( uri, prop, value, propuri );
Sets the specified property for the specified object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
ver = METADATA_VERSION();
Returns the metadata server's model version number.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_APPLYACT( tc, uri, act_uri, flags );
Applies an ACT to an object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_BEGTRAN( uri, flags, tc );
Begins the TC.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_DELACT( tc, act_uri );
Deletes ACT from the metadata server.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_ENDTRAN( uri, tc, flags );
Ends the TC.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_GETACTA( tc, act_uri, attr, attr_value );
Returns an ACT attribute.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_GETNACT( tc, uri, n, act_uri, name, desc, use <, flags);>
Returns the th ACT.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_GETNACTA( tc, act_uri, n, attr, attr_value );
Returns the th attribute for an ACT.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc=METASEC_GETNAUTH( tc , uri , n , type , name , auth , perm , cond <, flags > <, display >)
Returns the th authorization for an object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_GETNID( tc, uri, n, type, name, flags <, display, origin);>
Returns the th identity for an object. Identities can come directly from the object, from the inheritance parents, from the default ACT, and from any ACTs that are directly associated with the object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_NEWACT( tc, repos_uri, attr, attr_value <, attrn, attr_valuen > );
Creates a new ACT.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_REMACT( tc, uri, act_uri, flags);
Removes an ACT from an object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_SETACTA( tc, act_uri, attr, attr_value );
Sets an ACT attribute.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
rc = METASEC_SETAUTH( tc, uri, type, name, auth, perm, cond <, flags >);
Sets authorization for an object.
Product: Base SAS
Document: SAS 9.3 Language Interfaces to Metadata
MIN(argument-1,argument-2 <,...argument-n > )
Returns the smallest value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MINUTE(time | datetime)
Returns the minute from a SAS time or datetime value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MISSING( numeric-expression | character-expression )
Returns a numeric result that indicates whether the argument contains a missing value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MOD (argument-1,argument-2)
Returns the remainder from the division of the first argument by the second argument, fuzzed to avoid most unexpected floating-point results.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MODEXIST ('product-name' | 'pathname')
Determines whether a product image exists in the release of SAS that you have installed.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
MODEXIST('product-name')
Determines whether a software image exists in the version of SAS that you have installed.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
CALL MODULE(< cntl > ,module,arg-1,arg-2. . . ,arg-n);
num=MODULEN(< cntl > ,module,arg-1,arg-2…,arg-n);
char=MODULEC(< cntl > ,module,arg-1…,arg-2,arg-n);
CALL MODULEI < cntl > ,module arg-1,arg-2. . . ,arg-n);
num=MODULEIN(< cntl > ,module,arg-1,arg-2. . .,arg-n)
char=MODULEIC(< cntl > ,module,arg-1,arg-2. . .,arg-n);
Calls a specific routine or module that resides in an external dynamic link library (DLL).
Product: Base SAS
Document: SAS 9.3 Companion for Windows
MODULEC(< cntl-string,> module-name <,argument-1, ..., argument-n >)
Calls an external routine and returns a character value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MODULEN(< cntl-string,> module-name <,argument-1, ..., argument-n >)
Calls an external routine and returns a numeric value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MODZ (argument-1, argument-2)
Returns the remainder from the division of the first argument by the second argument, using zero fuzzing.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MONTH(date)
Returns the month from a SAS date value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MOPEN(directory-id,member-name<,open-mode<,record-length<,record-format>>>)
Opens a file by directory ID and member name, and returns either the file identifier or a 0.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
MOPEN(directory-id,member-name <,open-mode <,record-length <,record-format > > > )
Opens a file by directory ID and by member name, and returns either the file identifier or a 0.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
MOPEN(directory-id,member-name < ,open-mode <,record-length <,record-format > > > )
Opens a file by directory ID and member name, and returns either the file identifier or a 0.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MORT(a,p,r,n)
Returns amortization parameters.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MSPLINT(X, n, X1 <, X2 , …, Xn > , Y1 <,Y2 , …, Yn > <,D1 ,Dn > )
Returns the ordinate of a monotonicity-preserving interpolating spline.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
MVALID(libname, string, memtype <,validmemname >)
Checks the validity of a character string for use as a SAS member name.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
N(argument-1 <,...argument-n > )
Returns the number of nonmissing numeric values.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NETPV(r,freq,c0,c1,...,cn)
Returns the net present value as a fraction.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NLDATE(date,descriptor)
Converts the SAS date value to the date value of the specified locale by using the date format descriptors.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
NLDATM(datetime,descriptor)
Converts the SAS datetime value to the time value of the specified locale by using the datetime-format descriptors.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
NLITERAL(string)
Converts a character string that you specify to a SAS name literal.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NLTIME(time|datetime,descriptor,startpos)
Converts the SAS time or the datetime value to the time value of the specified locale by using the NLTIME descriptors.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
NMISS(argument-1 <,...argument-n > )
Returns the number of missing numeric values.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOMRATE(compounding-interval, rate)
Returns the nominal annual interest rate.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
Returns a random variate from a normal, or Gaussian, distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTALNUM(string <,start > )
Searches a character string for a nonalphanumeric character, and returns the first position at which the character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTALPHA(string <,start > )
Searches a character string for a nonalphabetic character, and returns the first position at which the character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTCNTRL(string <,start > )
Searches a character string for a character that is not a control character, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTDIGIT(string <,start > )
Searches a character string for any character that is not a digit, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTE(data-set-id)
Returns an observation ID for the current observation of a SAS data set.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTFIRST(string <,start > )
Searches a character string for an invalid first character in a SAS variable name under VALIDVARNAME=V7, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTGRAPH(string <,start > )
Searches a character string for a non-graphical character, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTLOWER(string <,start > )
Searches a character string for a character that is not a lowercase letter, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTNAME(string <,start > )
Searches a character string for an invalid character in a SAS variable name under VALIDVARNAME=V7, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTPRINT(string <,start > )
Searches a character string for a nonprintable character, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTPUNCT(string <,start > )
Searches a character string for a character that is not a punctuation character, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTSPACE(string <,start > )
Searches a character string for a character that is not a white-space character (blank, horizontal and vertical tab, carriage return, line feed, and form feed), and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTUPPER(string <,start > )
Searches a character string for a character that is not an uppercase letter, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NOTXDIGIT(string <,start > )
Searches a character string for a character that is not a hexadecimal character, and returns the first position at which that character is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NPV(r,freq,c0,c1,...,cn)
Returns the net present value with the rate expressed as a percentage.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NVALID(string <,validvarname > )
Checks the validity of a character string for use as a SAS variable name.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
NWKDOM(n, weekday, month, year)
Returns the date for the th occurrence of a weekday for the specified month and year.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
OPEN(< data-set-name <,mode <,generation-number <,type > > > > )
Opens a SAS data set.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ORDINAL(k,argument-1,argument-2 <,... argument-n > )
Returns the k smallest of the missing and nonmissing values.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PATHNAME((fileref | libref) < ,search-ref > )
Returns the physical name of a SAS library or an external file, or returns a blank.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
PATHNAME(( fileref | libref ) <,search-level > )
Returns the physical name of a SAS library or of an external file or returns a blank.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
PATHNAME((fileref | libref) <,search-ref > )
Returns the physical name of an external file or a SAS library, or returns a blank.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PCTL < n > (percentage, value1 <,value2,... > )
Returns the percentile that corresponds to the percentage.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PDF (dist,quantile <,parm-1, ... ,parm-k > )
Returns a value from a probability density (mass) distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PEEK(address <,length > )
Stores the contents of a memory address in a numeric variable on a 32-bit platform.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PEEKC(address <,length > )
Stores the contents of a memory address in a character variable on a 32-bit platform.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PEEKCLONG(address <,length > )
Stores the contents of a memory address in a character variable.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
PEEKCLONG(address <,length > )
Stores the contents of a memory address in a character variable on 32-bit and 64-bit platforms.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PEEKCLONG(address,length);
PEEKLONG(address,length);
Stores the contents of a memory address in a numeric variable on 32-bit and 64-bit platforms.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
PEEKLONG(address <,length)>
Stores the contents of a memory address in a numeric variable on 32-bit and 64-bit platforms.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
PEEKLONG(address <,length > )
Stores the contents of a memory address in a numeric variable.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
PEEKLONG(address <,length > )
Stores the contents of a memory address in a numeric variable on 32-bit and 64-bit platforms.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PERM(n <,r > )
Computes the number of permutations of items that are taken at a time.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PMT (rate, number-of-periods, principal-amount, < future-amount >, < type >)
Returns the periodic payment for a constant payment loan or the periodic savings for a future balance.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
POINT(data-set-id,note-id)
Locates an observation that is identified by the NOTE function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
POISSON(m,n)
Returns the probability from a Poisson distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PPMT (rate, period, number-of-periods, principal-amount, < future-amount >, < type >)
Returns the principal payment for a given period for a constant payment loan or the periodic savings for a future balance.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBBETA(x,a,b)
Returns the probability from a beta distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBBNML(p,n,m)
Returns the probability from a binomial distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBBNRM(x,y,r)
Returns a probability from a bivariate normal distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBCHI(x,df <,nc > )
Returns the probability from a chi-square distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBF(x,ndf,ddf <,nc > )
Returns the probability from an distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBGAM(x,a)
Returns the probability from a gamma distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBHYPR(N,K,n,x <,r > )
Returns the probability from a hypergeometric distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBIT(p)
Returns a quantile from the standard normal distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBMC(distribution,q,prob,df,nparms <, parameters >)
Returns a probability or a quantile from various distributions for multiple comparisons of means.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBNEGB(p,n,m)
Returns the probability from a negative binomial distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBNORM(x)
Returns the probability from the standard normal distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROBT(x,df <,nc > )
Returns the probability from a distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PROPCASE(argument <,delimiters > )
Converts all words in an argument to proper case.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PRXCHANGE( perl-regular-expression regular-expression-id , times, source)
Performs a pattern-matching replacement.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PRXMATCH ( regular-expression-id | perl-regular-expression , source)
Searches for a pattern match and returns the position at which the pattern is found.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PRXPAREN (regular-expression-id)
Returns the last bracket match for which there is a match in a pattern.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
regular-expression-id=PRXPARSE (perl-regular-expression)
Compiles a Perl regular expression (PRX) that can be used for pattern matching of a character value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PRXPOSN(regular-expression-id, capture-buffer, source)
Returns a character string that contains the value for a capture buffer.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PTRLONGADD(pointer <,amount > )
Returns the pointer address as a character variable on 32-bit and 64-bit platforms.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PUT(source, format.)
Returns a value using a specified format.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PUTC(source, format.<,w > )
Enables you to specify a character format at run time.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PUTN(source, format.<,w <,d > > )
Enables you to specify a numeric format at run time.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
PVP(A,c,n,K,k0 ,y)
Returns the present value for a periodic cash flow stream (such as a bond), with repayment of principal at maturity.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
QTR(date)
Returns the quarter of the year from a SAS date value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
QUANTILE(dist,probability,parm-1,…,parm-k)
Returns the quantile from a distribution when you specify the left probability (CDF).
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
QUOTE(argument)
Adds double quotation marks to a character value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RANBIN(seed,n,p)
Returns a random variate from a binomial distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RANCAU(seed)
Returns a random variate from a Cauchy distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RAND (dist, parm-1,…,parm-k)
Generates random numbers from a distribution that you specify.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RANEXP(seed)
Returns a random variate from an exponential distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RANGAM(seed,a)
Returns a random variate from a gamma distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RANGE(argument-1 <,...argument-n > )
Returns the range of the nonmissing values.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RANK(x)
Returns the position of a character in the ASCII collating sequence.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
RANK(x)
Returns the position of a character in the ASCII collating sequence.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
RANK(x)
Returns the position of a character in the ASCII or EBCDIC collating sequence.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RANNOR(seed)
Returns a random variate from a normal distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RANPOI(seed,m)
Returns a random variate from a Poisson distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RANTBL(seed,p1,... pi ... ,pn )
Returns a random variate from a tabled probability distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RANTRI(seed,h)
Returns a random variate from a triangular distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RANUNI(seed)
Returns a random variate from a uniform distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RENAME(old-name, new-name <, type <, description <, password <, generation > > > > )
Renames a member of a SAS library, an entry in a SAS catalog, an external file, or a directory.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
REPEAT(argument,n)
Returns a character value that consists of the first argument repeated n+1 times.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RESOLVE(argument)
Returns the resolved value of the argument after it has been processed by the macro facility.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
REVERSE(argument)
Reverses a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
REWIND(data-set-id)
Positions the data set pointer at the beginning of a SAS data set.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RIGHT(argument)
Right aligns a character expression.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
RMS(argument <,argument,... > )
Returns the root mean square of the nonmissing arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ROUND (argument <,rounding-unit > )
Rounds the first argument to the nearest multiple of the second argument, or to the nearest integer when the second argument is omitted.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ROUNDE (argument <,rounding-unit > )
Rounds the first argument to the nearest multiple of the second argument, and returns an even multiple when the first argument is halfway between the two nearest multiples.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ROUNDZ (argument <,rounding-unit > )
Rounds the first argument to the nearest multiple of the second argument, using zero fuzzing.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SASMSG (BASENAME", "KEY", <<"QUOTE"|"DQUOTE"|"NOQUOTE">
<, "substitution 1", ..., "substitution 7">>)
Specifies a message from a data set. The returned message is based on the current locale and a specified key.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
SASMSGL(("BASENAME", "KEY", "LOCALE", <<"Q"|"D"|"N">
<, "substitution 1", ..., "substitution 6">>)
Specifies a message from a data set. The message is based on a specified locale value and a specified key value.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
SAVING(f,p,r,n)
Returns the future value of a periodic saving.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SAVINGS(base-date, initial-deposit-date, deposit-amount, deposit-number,
deposit-interval, compounding-interval, date-1, rate-2 <,date-2, rate-2,...>)
Returns the balance of a periodic savings by using variable interest rates.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SCAN(string, count <,charlist <,modifiers > > )
Returns the th word from a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SDF(dist,quantile,parm-1,...,parm-k)
Returns a survival function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SECOND( time | datetime )
Returns the second from a SAS time or datetime value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
Setting SAS Locale
SETLOCALE(sas_locale)
Customize single locale elements
SETLOCALE(key, value)
Customize single locale elements
SETLOCALE(category_name, sas_locale)
Specifies the locale keys for the current SAS locale.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
SIGN(argument)
Returns the sign of a value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SIN(argument)
Returns the sine.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SINH(argument)
Returns the hyperbolic sine.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SKEWNESS(argument-1,argument-2,argument-3 <,... argument-n > )
Returns the skewness of the nonmissing arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SLEEP(n<,unit>)
Suspends execution of a SAS DATA step for a specified period of time.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
SLEEP(n <, unit > )
For a specified period of time, suspends the execution of a program that invokes this function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SMALLEST (k, value-1 <, value-2 ... > )
Returns the th smallest nonmissing value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SOAPWEB (IN, URL <,options >)
Calls a Web service by using basic Web authentication; credentials are provided in the arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SOAPWEBMETA (IN, URL <,options >)
Calls a Web service by using basic Web authentication; credentials for the authentication domain are retrieved from metadata.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SOAPWIPSERVICE (IN, SERVICE <,options >)
Calls a SAS registered Web service by using WS-Security authentication; credentials are provided in the arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SOAPWIPSRS (IN, URL, SRSURL <,options >)
Calls a SAS registered Web service by using WS-Security authentication; credentials are provided in the arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SOAPWS (IN, URL <,options >)
Calls a Web service by using WS-Security authentication; credentials are provided in the arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SOAPWSMETA (IN, URL <,options >)
Calls a Web service by using WS-Security authentication; credentials for the provided authentication domain are retrieved from metadata.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
sortKey(string, <locale, strength, case, numeric, order> )
creates a linguistic sort key.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
SOUNDEX(argument)
Encodes a string to facilitate searching.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SPEDIS(query,keyword)
Determines the likelihood of two words matching, expressed as the asymmetric spelling distance between the two words.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SQRT(argument)
Returns the square root of a value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SQUANTILE(dist, probability, parm-1, ... , parm-k)
Returns the quantile from a distribution when you specify the right probability (SDF).
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
STD(argument-1,argument-2 <,...argument-n > )
Returns the standard deviation of the nonmissing arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
STDERR(argument-1,argument-2 <,... argument-n > )
Returns the standard error of the mean of the nonmissing arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
STFIPS(postal-code)
Converts state postal codes to FIPS state codes.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
STNAME(postal-code)
Converts state postal codes to uppercase state names.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
STNAMEL(postal-code)
Converts state postal codes to mixed case state names.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
STRIP(string)
Returns a character string with all leading and trailing blanks removed.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SUBPAD(string, position <, length > )
Returns a substring that has a length you specify, using blank padding if necessary.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SUBSTR(variable, position <,length >)=characters-to-replace
Replaces character value contents.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
< variable=> SUBSTR(string,position <,length > )
Extracts a substring from an argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SUBSTRN(string, position <, length >)
Returns a substring, allowing a result with a length of zero.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SUM(argument,argument,... )
Returns the sum of the nonmissing arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SUMABS(value-1 <,value-2 ... > )
Returns the sum of the absolute values of the non-missing arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYMEXIST (argument)
Returns an indication of the existence of a macro variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYMGET(argument)
Returns the value of a macro variable during DATA step execution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYMGLOBL (argument)
Returns an indication of whether a macro variable is in global scope to the DATA step during DATA step execution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYMLOCAL (argument)
Returns an indication of whether a macro variable is in local scope to the DATA step during DATA step execution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYSEXIST (argument)
Returns a value that indicates whether an operating-environment variable exists in your environment.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYSGET('environment-variable')
Returns the value of the specified operating environment variable.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
SYSGET(operating-environment-variable)
Returns the value of the specified operating-environment variable.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
SYSGET(operating-environment-variable)
Returns the value of the specified operating environment variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYSMSG()
Returns error or warning message text from processing the last data set or external file function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYSPARM()
Returns the system parameter string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYSPROCESSID()
Returns the process ID of the current process.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYSPROCESSNAME(< process_id > )
Returns the process name that is associated with a given process ID, or returns the name of the current process.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYSPROD(product-name)
Determines whether a product is licensed.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYSRC()
Returns a system error number.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
SYSTEM(command)
Issues an operating environment command during a SAS session and returns the system return code.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
SYSTEM(command)
Issues an operating environment command during a SAS session, and returns the system return code.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TAN(argument)
Returns the tangent.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TANH(argument)
Returns the hyperbolic tangent.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TIME()
Returns the current time of day as a numeric SAS time value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TIMEPART(datetime)
Extracts a time value from a SAS datetime value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TIMEVALUE(base-date, reference-date, reference-amount, compounding-interval,
date-1, rate-1 <,date-2, rate-2,...>)
Returns the equivalent of a reference amount at a base date by using variable interest rates.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TINV(p,df <,nc > )
Returns a quantile from the distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TNONCT(x,df,prob)
Returns the value of the noncentrality parameter from the Student's distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TODAY()
Returns the current date as a numeric SAS date value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TRANSLATE(source,to-1,from-1 <,…to-n, from-n > )
Replaces specific characters in a character expression.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
TRANSLATE(source,to-1,from-1 <,…to-n,from-n > )
Replaces specific characters in a character expression.
Product: Base SAS
Document: SAS 9.3 Companion for UNIX Environments
TRANSLATE(source, to-1, from-1, <... to-n, from-n > )
Replaces specific characters in a character expression.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
TRANSLATE(source,to-1,from-1 <,…to-n,from-n > )
Replaces specific characters in a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TRANSTRN(source,target,replacement)
Replaces or removes all occurrences of a substring in a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TRANTAB(string,trantab_name)
Transcodes data by using the specified translation table.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
TRANWRD(source,target,replacement)
Replaces all occurrences of a substring in a character string.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TRIGAMMA(argument)
Returns the value of the trigamma function.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TRIM(argument)
Removes trailing blanks from a character string, and returns one blank if the string is missing.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TRIMN(argument)
Removes trailing blanks from character expressions, and returns a string with a length of zero if the expression is missing.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TRUNC(number,length)
Truncates a numeric value to a specified number of bytes.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
TSO(command)
Issues a TSO command or invokes a CLIST or a REXX exec during a SAS session.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
STR=UNICODE(< instr > (,<Unicode type> ))
converts Unicode characters to the current SAS session encoding.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
STR=UNICODEC(< instr > (,<Unicode type> ))
converts characters in the current SAS session encoding to Unicode characters.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
UNICODELEN()
specifies the length of the character unit for the Unicode data.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
UNICODEWIDTH()
specifies the length of a display unit for the Unicode data.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
Returns a random variate from a uniform distribution.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
UPCASE(argument)
Converts all letters in an argument to uppercase.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
URLDECODE(argument)
Returns a string that was decoded using the URL escape syntax.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
URLENCODE(argument)
Returns a string that was encoded using the URL escape syntax.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
USS(argument-1 <,...argument-n > )
Returns the uncorrected sum of squares of the nonmissing arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
UUIDGEN(< max-warnings <,binary-result > > )
Returns the short or binary form of a Universal Unique Identifier (UUID).
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VAR(argument-1,argument-2 <,...argument-n > )
Returns the variance of the nonmissing arguments.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VARFMT(data-set-id,var-num)
Returns the format that is assigned to a SAS data set variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VARINFMT(data-set-id,var-num)
Returns the informat that is assigned to a SAS data set variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VARLABEL(data-set-id,var-num)
Returns the label that is assigned to a SAS data set variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VARLEN(data-set-id,var-num)
Returns the length of a SAS data set variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VARNAME(data-set-id,var-num)
Returns the name of a SAS data set variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VARNUM(data-set-id,var-name)
Returns the number of a variable's position in a SAS data set.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VARRAY (name)
Returns a value that indicates whether the specified name is an array.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VARRAYX (expression)
Returns a value that indicates whether the value of the specified argument is an array.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VARTRANSCODE(data-set-id, var-num)
Returns the transcode attribute of a SAS data set variable.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
VARTYPE(data-set-id,var-num)
Returns the data type of a SAS data set variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VERIFY(source,excerpt-1 <, …, excerpt-n > )
Returns the position of the first character in a string that is not in any of several other strings.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VFORMAT (var)
Returns the format that is associated with the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VFORMATD (var)
Returns the decimal value of the format that is associated with the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VFORMATDX (expression)
Returns the decimal value of the format that is associated with the value of the specified argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VFORMATN (var)
Returns the format name that is associated with the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VFORMATNX (expression)
Returns the format name that is associated with the value of the specified argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VFORMATW (var)
Returns the format width that is associated with the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VFORMATWX (expression)
Returns the format width that is associated with the value of the specified argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VFORMATX (expression)
Returns the format that is associated with the value of the specified argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VINARRAY (var)
Returns a value that indicates whether the specified variable is a member of an array.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VINARRAYX (expression)
Returns a value that indicates whether the value of the specified argument is a member of an array.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VINFORMAT (var)
Returns the informat that is associated with the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VINFORMATD (var)
Returns the decimal value of the informat that is associated with the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VINFORMATDX (expression)
Returns the decimal value of the informat that is associated with the value of the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VINFORMATN (var)
Returns the informat name that is associated with the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VINFORMATNX (expression)
Returns the informat name that is associated with the value of the specified argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VINFORMATW (var)
Returns the informat width that is associated with the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VINFORMATWX (expression)
Returns the informat width that is associated with the value of the specified argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VINFORMATX (expression)
Returns the informat that is associated with the value of the specified argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VLABEL (var)
Returns the label that is associated with the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VLABELX (expression)
Returns the label that is associated with the value of the specified argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VLENGTH (var)
Returns the compile-time (allocated) size of the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VLENGTHX (expression)
Returns the compile-time (allocated) size for the variable that has a name that is the same as the value of the argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VNAME (var)
Returns the name of the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VNAMEX (expression)
Validates the value of the specified argument as a variable name.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VTRANSCODE (var)
Returns a value that indicates whether transcoding is enabled for the specified character variable.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
VTRANSCODEX (var)
Returns a value that indicates whether transcoding is enabled for the specified argument.
Product: Base SAS
Document: SAS 9.3 National Language Support (NLS): Reference Guide
VTYPE (var)
Returns the type (character or numeric) of the specified variable.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VTYPEX (expression)
Returns the type (character or numeric) for the value of the specified argument.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VVALUE(var)
Returns the formatted value that is associated with the variable that you specify.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
VVALUEX(expression)
Returns the formatted value that is associated with the argument that you specify.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
WAKEUP(until-when)
Specifies the time a SAS DATA step continues execution.
Product: Base SAS
Document: SAS 9.3 Companion for Windows
WEEK(< sas-date > , < 'descriptor' > )
Returns the week-number value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
WEEKDAY(date)
From a SAS date value, returns an integer that corresponds to the day of the week.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
WHICHC(string, value-1 <, value-2, …> )
Searches for a character value that is equal to the first argument, and returns the index of the first matching value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
WHICHN(argument, value-1 <, value-2, …> )
Searches for a numeric value that is equal to the first argument, and returns the index of the first matching value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
WTO (“text-string” | var )
Sends a message to the system console.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
YEAR(date)
Returns the year from a SAS date value.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
YIELDP(A,c,n,K,k0 ,p)
Returns the yield-to-maturity for a periodic cash flow stream, such as a bond.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
YRDIF(start-date,end-date,< basis >)
Returns the difference in years between two dates according to specified day count conventions; returns a person’s age.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
YYQ(year,quarter)
Returns a SAS date value from year and quarter year values.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
zdsattr( variable name , < option >);
Returns the attributes for the data set name that is specified in the input variable according to the type of request.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
zdsidnm( variable name , index );
Returns individual data set names from the variable that the ZDSLIST function created based on an index.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
zdslist( category , data set filter , volume filter , < option >);
Returns a list of data set names.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
zdsnum(variable name);
Returns a count of the number of data set names that are returned from the ZDSLIST function.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
zdsxatt( variable name );
Returns the number of attributes retrieved by a previous ZDSATTR request.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
zdsyatt( variable name , indexj );
Displays each attribute that is created by .
Product: Base SAS
Document: SAS 9.3 Companion for z/OS
ZIPCITY(zip-code)
Returns a city name and the two-character postal code that corresponds to a ZIP code.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ZIPCITYDISTANCE(zip-code-1, zip-code-2)
Returns the geodetic distance between two ZIP code locations.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ZIPFIPS(zip-code)
Converts ZIP codes to two-digit FIPS codes.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ZIPNAME(zip-code)
Converts ZIP codes to uppercase state names.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ZIPNAMEL(zip-code)
Converts zip codes to mixed case state names.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ZIPSTATE(zip-code)
Converts ZIP codes to two-character state postal codes.
Product: Base SAS
Document: SAS 9.3 Functions and CALL Routines: Reference
ZVOLLIST( category , < volume filter >, < option >);
Returns a list of volume serial numbers.
Product: Base SAS
Document: SAS 9.3 Companion for z/OS

SAS Data Quality Server

D

Name
Syntax and Description
DMSRVBATCHJOB (job-name , host, port <,parameter-list >)
Runs a DataFlux data or process job on a DataFlux Data Management Server and returns a job identifier.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DMSRVCOPYLOG (job-ID, host, port, filename )
Copies a job's log file from a DataFlux Data Management Server to a local host.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DMSRVDELETELOG (job-ID, host, port )
Deletes a job's log file from a DataFlux Data Management Server.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DMSRVJOBSTATUS (job-ID, host, port, time-out, interval )
Returns the status of a job that was submitted to a DataFlux Data Management Server.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DMSRVKILLJOB (job-ID, host, port )
Terminates a job that is running on a DataFlux Data Management Server.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DMSRVPROFILEJOB (job-name, host, port, append-flag <,description-character > )
Generates a profile from a Data Management server repository.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DMSRVUSER (user-ID, password)
Registers a user on a DataFlux Data Management Server.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DMSRVVER (host , port )
Returns the version of the DataFlux Data Management Server.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQCASE (char, 'case-definition' <, 'locale'> )
Returns a character value with standardized capitalization.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQEXTINFOGET ('extraction-definition' <,'locale'> )
Returns the token names in an extraction definition.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQEXTRACT ( 'extraction-string', 'extraction-definition' <,'locale'>)
Returns an extracted character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQEXTTOKENGET (extraction-char, 'token', 'extraction-definition', ' <,'locale'> )
Returns a token from an extraction character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQEXTTOKENPUT ('extraction-char', 'token-value', 'token-name',
'extraction-definition' <,'locale'> )
Inserts a token into an extraction character value and returns the updated extraction character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQGENDER (char, 'gender-analysis-definition' <,'locale'> )
Returns a gender determination from the name of an individual.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQGENDERINFOGET ('gender-analysis-definition' <,'locale'> )
Returns the name of the parse definition that is associated with the specified gender definition.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQGENDERPARSED (parsed-char, 'gender-analysis-definition' <,'locale'> )
Returns the gender of an individual.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQIDENTIFY (char, 'identification-definition' <,'locale'> )
Returns a category name from a character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQLOCALEGUESS (char, 'locale-guess-definition')
Returns the name of the locale that is most likely represented by a character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQLOCALEINFOGET (<'info-type'> )
Returns information about locales.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQLOCALEINFOLIST ('definition-type', 'locale' )
Returns the names of the definitions in a locale and a count of those definitions.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQMATCH (char, 'match-definition' <,'sensitivity'> <,'locale'> )
Returns a match code from a character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQMATCHINFOGET ('match-definition' <,'locale'> )
Returns the name of the parse definition that is associated with a match definition.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQMATCHPARSED (parsed-char, 'match-definition' <,sensitivity > <,'locale'> )
Returns a match code from a parsed character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQOPTSURFACE ('surface-definition')
Reveals or hides non-surfaced definitions.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQPARSE ('parse-string', 'parse-definition' <,'locale'>)
Returns a parsed character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQPARSEINFOGET ('parse-definition' <,'locale'> )
Returns the token names in a parse definition.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQPARSEINPUTLEN ('input-length')
Sets the default length of parsed input, and returns a string indicating its previous value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQPARSERESLIMIT ('resource-limit')
Sets a limit on resources consumed during parsing.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQPARSESCORDEPTH (level)
Specifies how deeply to search for the best parsing score.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQPARSETOKENGET (parsed-char, 'token', 'parse-definition' <,'locale'> )
Returns a token from a parsed character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQPARSETOKENPUT ('parsed-char', 'token-value', 'token-name', 'parse-definition'
<,'locale'> )
Inserts a token into a parsed character value and returns the updated parsed character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQPATTERN ('char' , 'pattern-analysis-definition' <,'locale'> )
Returns a pattern analysis from an input character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
Deprecated. Runs a DataFlux dfPower Architect job on a DataFlux Integration Server and returns a job identifier.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
Deprecated. Copies a job's log file from a DataFlux Integration Server.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
Deprecated. Deletes a job's log file from a DataFlux Integration Server.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
Deprecated. Returns the status of a job that was submitted to a DataFlux Integration Server.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
Deprecated. Terminates a job that is running on a DataFlux Integration Server.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
Deprecated. Runs a file-type DataFlux dfProfile job on a DataFlux Integration Server and returns a job identifier.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
Deprecated. Runs a repository–type DataFlux dfProfile job on a DataFlux Integration Server and returns a job identifier.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
Deprecated. Registers a user on a DataFlux Integration Server.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
Deprecated. Returns the version of the DataFlux Integration Server.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQSTANDARDIZE (char, ' standardization-definition' <, locale > )
Returns a character value after standardizing casing, spacing, and format, and then applies a common representation to certain words and abbreviations.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQTOKEN(char, 'token' , 'parse-definition' <, locale > )
Returns a token from a character value.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQVERBF ()
Returns the version of Blue Fusion.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference
DQVERQKB ()
Returns the version of the currently loaded QKB.
Product: SAS Data Quality Server
Document: SAS 9.3 Data Quality Server Reference

SAS Grid Computing

G

Name
Syntax and Description
grdsvc_enable(identifier <,option-1; ... option-n > )
grdsvc_enable(identifier,"" | " )
Enables or disables one or all SAS sessions on a grid.
Product: SAS Grid Computing
Document: Grid Computing in SAS 9.3
grdsvc_getaddr(identifier)
Reports the IP address of the grid node on which the SAS session was chosen to execute.
Product: SAS Grid Computing
Document: Grid Computing in SAS 9.3
grdsvc_getinfo(identifier)
Reports information about the grid environment.
Product: SAS Grid Computing
Document: Grid Computing in SAS 9.3
grdsvc_getname(identifier)
Reports the name of the grid node on which the SAS grid server session was chosen to execute.
Product: SAS Grid Computing
Document: Grid Computing in SAS 9.3
grdsvc_nnodes(argument;option)
Reports the total number of job slots that are available for use on a grid.
Product: SAS Grid Computing
Document: Grid Computing in SAS 9.3

SAS Integration Technologies

S

Name
Syntax and Description
STPSRV_HEADER( Header Name , Header Value )
Adds or modifies a header
Product: SAS Integration Technologies
Document: SAS 9.3 Stored Processes: Developer's Guide
STPSRV_SESSION(' command ',< timeout >)
Creates or deletes a session
Product: SAS Integration Technologies
Document: SAS 9.3 Stored Processes: Developer's Guide
STPSRV_UNQUOTE2( paramname )
Unmasks quotation mark characters in an input parameter
Product: SAS Integration Technologies
Document: SAS 9.3 Stored Processes: Developer's Guide
STPSRVGETC( valuecode )
Returns the character value of a server property
Product: SAS Integration Technologies
Document: SAS 9.3 Stored Processes: Developer's Guide
STPSRVGETN( valuecode )
Returns the numeric value of a server property
Product: SAS Integration Technologies
Document: SAS 9.3 Stored Processes: Developer's Guide
STPSRVSET( valuecode , newvalue )
Sets the value of a server property
Product: SAS Integration Technologies
Document: SAS 9.3 Stored Processes: Developer's Guide

SAS/CONNECT

C R

Name
Syntax and Description
cval=COMAMID();
Returns a string that contains all of the communications access methods that are valid for the operating environment that the SCL code executes under.
Product: SAS/CONNECT
Document: SAS/CONNECT 9.3 User's Guide
rc=RLINK('server-ID' );
Verifies whether a connection was established between a SAS/CONNECT client and a server session.
Product: SAS/CONNECT
Document: SAS/CONNECT 9.3 User's Guide
cval =RSESSION(n );
Returns the name, description, and SAS version of a SAS/CONNECT server session.
Product: SAS/CONNECT
Document: SAS/CONNECT 9.3 User's Guide
sysrc =RSTITLE(session-ID, description );
Defines a description for an existing connection to a SAS/CONNECT server session.
Product: SAS/CONNECT
Document: SAS/CONNECT 9.3 User's Guide

SAS/GRAPH

A B C D E F G H I L M N O P R S T U V W

Name
Syntax and Description
return-code-variable=GDRAW('ARC', x, y, radius, start, end);
Draws a circular arc
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('ASF', attribute, status);
Specifies an aspect source flag to bundle or separate attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('ASF', attribute, status);
Specifies an aspect source flag to bundle or separate attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('ASF', attribute, status);
Specifies an aspect source flag to bundle or separate attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('ASF', attribute, status);
Specifies an aspect source flag to bundle or separate attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('ASPECT', aspect);
Specifies the aspect ratio
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('ASPECT', aspect);
Specifies the aspect ratio
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('ASPECT', aspect);
Specifies the aspect ratio
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('ASPECT', aspect);
Specifies the aspect ratio
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('ASPECT', aspect);
Specifies the aspect ratio
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('ASPECT', aspect);
Specifies the aspect ratio
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GDRAW('BAR', x1, y1, x2, y2);
Draws a rectangle
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CATALOG', libref, catalog-name);
Specifies the catalog for the graphs
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CATALOG', libref, catalog-name);
Specifies the catalog for the graphs
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CATALOG', libref, catalog-name);
Specifies the catalog for the graphs
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CATALOG', libref, catalog-name);
Specifies the catalog for the graphs
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CBACK', cback);
Specifies the background color
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CBACK', cback);
Specifies the background color
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CBACK', cback);
Specifies the background color
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CBACK', cback);
Specifies the background color
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CBACK', cback);
Specifies the background color
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CBACK', cback);
Specifies the background color
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GRAPH ('CLEAR'<, name> <, des><, byline>);
Opens a graphics segment for output
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CLIP', status);
Specifies whether clipping is on or off
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CLIP', status);
Specifies whether clipping is on or off
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CLIP', status);
Specifies whether clipping is on or off
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('CLIP', status);
Specifies whether clipping is on or off
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
CALL GASK('COLINDEX', n, index-array, return-code-variable);
Finds the color indexes that have colors associated with them
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('COLREP', color-index, color);
Associates a color name with a certain color index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('COLREP', color-index, color);
Associates a color name with a certain color index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('COLREP', color-index, color);
Associates a color name with a certain color index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('COLREP', color-index, color);
Associates a color name with a certain color index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GRAPH('COPY', name, new-name);
Copies a graph
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GRAPH('DELETE', name);
Deletes a graph
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('DEVICE', device);
Specifies the output graphics device
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('DEVICE', device);
Specifies the output graphics device
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('DEVICE', device);
Specifies the output graphics device
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('DEVICE', device);
Specifies the output graphics device
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('DEVICE', device);
Specifies the output graphics device
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('DEVICE', device);
Specifies the output graphics device
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GDRAW('ELLARC', x, y, major, minor, start, end, angle);
Draws an elliptical arc
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GDRAW('ELLIPSE', x, y, major, minor, start, end, angle);
Draws an ellipse
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILCOLOR', color-index);
Specifies the color index of the color used to draw fill areas
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILCOLOR', color-index);
Specifies the color index of the color used to draw fill areas
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILCOLOR', color-index);
Specifies the color index of the color used to draw fill areas
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILCOLOR', color-index);
Specifies the color index of the color used to draw fill areas
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILINDEX', index);
Specifies the index of the bundle of fill area attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILINDEX', index);
Specifies the index of the bundle of fill area attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILINDEX', index);
Specifies the index of the bundle of fill area attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILINDEX', index);
Specifies the index of the bundle of fill area attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GDRAW('FILL', n, x-values, y-values);
Draws a filled area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GDRAW('FILL', n, x-values, y-values);
Draws a filled area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILREP', index, color-index, interior, style-index);
Associates a bundle of fill attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILREP', index, color-index, interior, style-index);
Associates a bundle of fill attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILREP', index, color-index, interior, style-index);
Associates a bundle of fill attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILREP', index, color-index, interior, style-index);
Associates a bundle of fill attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILSTYLE', style-index);
Specifies the style of the interior of the fill area when the FILTYPE is PATTERN or HATCH
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILSTYLE', style-index);
Specifies the style of the interior of the fill area when the FILTYPE is PATTERN or HATCH
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILSTYLE', style-index);
Specifies the style of the interior of the fill area when the FILTYPE is PATTERN or HATCH
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILSTYLE', style-index);
Specifies the style of the interior of the fill area when the FILTYPE is PATTERN or HATCH
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILTYPE', interior);
Specifies the type of the interior of the fill area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILTYPE', interior);
Specifies the type of the interior of the fill area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILTYPE', interior);
Specifies the type of the interior of the fill area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('FILTYPE', interior);
Specifies the type of the interior of the fill area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GINIT();
Initializes DSGI
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GPRINT(code);
Prints the specified interface error message
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
CALL GASK('GRAPHLIST', n, name-array, return-code-variable);
Finds the names of segments in the current catalog
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GTERM();
Terminates DSGI
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HPOS', hpos);
Specifies the number of columns
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HPOS', hpos);
Specifies the number of columns
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HPOS', hpos);
Specifies the number of columns
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HPOS', hpos);
Specifies the number of columns
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HPOS', hpos);
Specifies the number of columns
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HPOS', hpos);
Specifies the number of columns
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HSIZE', hsize);
Specifies the horizontal dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HSIZE', hsize);
Specifies the horizontal dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HSIZE', hsize);
Specifies the horizontal dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HSIZE', hsize);
Specifies the horizontal dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HSIZE', hsize);
Specifies the horizontal dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HSIZE', hsize);
Specifies the horizontal dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HTML', 'string');
Specifies the HTML string to invoke when an affected DSGI graphics element in a web page is clicked
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HTML', 'string');
Specifies the HTML string to invoke when an affected DSGI graphics element in a web page is clicked
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HTML', 'string');
Specifies the HTML string to invoke when an affected DSGI graphics element in a web page is clicked
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('HTML', 'string');
Specifies the HTML string to invoke when an affected DSGI graphics element in a web page is clicked
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GDRAW('IMAGE', 'external-file', x1, y1, x2, y2, 'style');
Displays an image
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GRAPH('INSERT', name);
Inserts a previously created segment into the currently open graph
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINCOLOR', color-index);
Specifies the color index of the color used to draw lines
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINCOLOR', color-index);
Specifies the color index of the color used to draw lines
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINCOLOR', color-index);
Specifies the color index of the color used to draw lines
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINCOLOR', color-index);
Specifies the color index of the color used to draw lines
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GDRAW('LINE', n, x-values, y-values);
Draws a polyline
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LININDEX', index);
Specifies the index of the bundle of line attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LININDEX', index);
Specifies the index of the bundle of line attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LININDEX', index);
Specifies the index of the bundle of line attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LININDEX', index);
Specifies the index of the bundle of line attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('LINREP',index, color-index, width, type);
Associates a bundle of line attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('LINREP',index, color-index, width, type);
Associates a bundle of line attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('LINREP',index, color-index, width, type);
Associates a bundle of line attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('LINREP',index, color-index, width, type);
Associates a bundle of line attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINTYPE', type);
Specifies the line type
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINTYPE', type);
Specifies the line type
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINTYPE', type);
Specifies the line type
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINTYPE', type);
Specifies the line type
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINWIDTH', width);
Specifies the thickness of the line
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINWIDTH', width);
Specifies the thickness of the line
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINWIDTH', width);
Specifies the thickness of the line
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('LINWIDTH', width);
Specifies the thickness of the line
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARCOLOR', color-index);
Specifies the color index of the color used to draw markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARCOLOR', color-index);
Specifies the color index of the color used to draw markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARCOLOR', color-index);
Specifies the color index of the color used to draw markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARCOLOR', color-index);
Specifies the color index of the color used to draw markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARINDEX', index);
Specifies the index of the bundle of marker attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARINDEX', index);
Specifies the index of the bundle of marker attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARINDEX', index);
Specifies the index of the bundle of marker attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARINDEX', index);
Specifies the index of the bundle of marker attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GDRAW ('MARK', n, x-values, y-values);
Draws a polymarker
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('MARREP',index, color-index, size, type);
Associates a bundle of marker attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('MARREP',index, color-index, size, type);
Associates a bundle of marker attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('MARREP',index, color-index, size, type);
Associates a bundle of marker attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('MARREP',index, color-index, size, type);
Associates a bundle of marker attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARSIZE', size);
Selects the size of markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARSIZE', size);
Selects the size of markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARSIZE', size);
Selects the size of markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARSIZE', size);
Selects the size of markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARTYPE', type);
Selects the type of markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARTYPE', type);
Selects the type of markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARTYPE', type);
Selects the type of markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MARTYPE', type);
Selects the type of markers
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
CALL GASK ('MAXDISP', units, x-dim, y-dim, x-pixels, y-pixels, return-code-variable);
Finds the maximum display area size
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MESSAGE', status);
Specifies whether the interface error message system is enabled or disabled
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MESSAGE', status);
Specifies whether the interface error message system is enabled or disabled
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MESSAGE', status);
Specifies whether the interface error message system is enabled or disabled
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('MESSAGE', status);
Specifies whether the interface error message system is enabled or disabled
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
CALL GASK('NUMGRAPH', n, return-code-variable);
Finds the number of graphs in the current catalog
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
CALL GASK('OPENGRAPH', name, return-code-variable);
Finds the name of the segment currently open
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=CALL GSET('PATREP', index, pattern-name, hatch-name);
Specifies the pattern name of a style index for a particular fill type.
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=CALL GSET('PATREP', index, pattern-name, hatch-name);
Specifies the pattern name of a style index for a particular fill type.
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=CALL GSET('PATREP', index, pattern-name, hatch-name);
Specifies the pattern name of a style index for a particular fill type.
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=CALL GSET('PATREP', index, pattern-name, hatch-name);
Specifies the pattern name of a style index for a particular fill type.
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GDRAW('PIE', x, y, radius, start, end);
Draws a filled circle or section of a filled circle
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GRAPH('PLAY', graph-name);
Displays the specified graph on your output
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GRAPH('RENAME', name, new-name);
Renames a graph
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
CALL GASK('STATE', status);
Finds the current operating state of DSGI
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXALIGN', halign, valign);
Specifies the horizontal and vertical alignment of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXALIGN', halign, valign);
Specifies the horizontal and vertical alignment of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXALIGN', halign, valign);
Specifies the horizontal and vertical alignment of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXALIGN', halign, valign);
Specifies the horizontal and vertical alignment of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXCOLOR', color-index);
Specifies the color index of the color used to draw text strings
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXCOLOR', color-index);
Specifies the color index of the color used to draw text strings
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXCOLOR', color-index);
Specifies the color index of the color used to draw text strings
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXCOLOR', color-index);
Specifies the color index of the color used to draw text strings
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
CALL GASK ('TEXEXTENT', x, y, string, x-end, y-end, x1, x2, x3, x4, y1, y2, y3, y4,
return-code-variable);
Finds the text extent rectangle and concatenation point for a specified text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXFONT', font);
Specifies the font used to draw text strings
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXFONT', font);
Specifies the font used to draw text strings
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXFONT', font);
Specifies the font used to draw text strings
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXFONT', font);
Specifies the font used to draw text strings
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXHEIGHT', height);
Specifies the character height of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXHEIGHT', height);
Specifies the character height of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXHEIGHT', height);
Specifies the character height of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXHEIGHT', height);
Specifies the character height of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXINDEX', index);
Specifies the index of the bundle of text attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXINDEX', index);
Specifies the index of the bundle of text attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXINDEX', index);
Specifies the index of the bundle of text attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXINDEX', index);
Specifies the index of the bundle of text attributes
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXPATH', path);
Specifies the direction of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXPATH', path);
Specifies the direction of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXPATH', path);
Specifies the direction of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXPATH', path);
Specifies the direction of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('TEXREP',index, color-index, font);
Associates a bundle of text attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('TEXREP',index, color-index, font);
Associates a bundle of text attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('TEXREP',index, color-index, font);
Associates a bundle of text attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('TEXREP',index, color-index, font);
Associates a bundle of text attributes with an index
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GDRAW('TEXT', x, y, string);
Draws a text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXUP',upx, upy);
Specifies the orientation (angle) of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXUP',upx, upy);
Specifies the orientation (angle) of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXUP',upx, upy);
Specifies the orientation (angle) of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TEXUP',upx, upy);
Specifies the orientation (angle) of the text string
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
CALL GASK ('TRANS', n, vllx, vlly, vurx, vury, wllx, wlly, wurx, wury,
return-code-variable);
Finds the viewport and window coordinates associated with a transformation number
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TRANSNO', n);
Specifies the number of the transformation to be used
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TRANSNO', n);
Specifies the number of the transformation to be used
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TRANSNO', n);
Specifies the number of the transformation to be used
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('TRANSNO', n);
Specifies the number of the transformation to be used
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GRAPH('UPDATE' <, 'show'>);
Completes the currently open graph, or displays it, or both
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VIEWPORT', n, llx, lly, urx, ury);
Associates a viewport with a transformation number
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VIEWPORT', n, llx, lly, urx, ury);
Associates a viewport with a transformation number
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VIEWPORT', n, llx, lly, urx, ury);
Associates a viewport with a transformation number
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VIEWPORT', n, llx, lly, urx, ury);
Associates a viewport with a transformation number
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VPOS', vpos);
Specifies the number of rows
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VPOS', vpos);
Specifies the number of rows
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VPOS', vpos);
Specifies the number of rows
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VPOS', vpos);
Specifies the number of rows
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VPOS', vpos);
Specifies the number of rows
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VPOS', vpos);
Specifies the number of rows
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VSIZE', vsize);
Specifies the vertical dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VSIZE', vsize);
Specifies the vertical dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VSIZE', vsize);
Specifies the vertical dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VSIZE', vsize);
Specifies the vertical dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VSIZE', vsize);
Specifies the vertical dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET('VSIZE', vsize);
Specifies the vertical dimension of the graphics output area
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('WINDOW', n, llx, lly, urx, ury);
Associates a window with a transformation number
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('WINDOW', n, llx, lly, urx, ury);
Associates a window with a transformation number
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('WINDOW', n, llx, lly, urx, ury);
Associates a window with a transformation number
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
return-code-variable=GSET ('WINDOW', n, llx, lly, urx, ury);
Associates a window with a transformation number
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
CALL GASK('WSACTIVE', status);
Finds whether the interface is active
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference
CALL GASK('WSOPEN', status);
Finds whether the interface is open
Product: SAS/GRAPH
Document: SAS/GRAPH 9.3: Reference

SAS/IntrNet

A

Name
Syntax and Description
CLAUSE = APPSRV_AUTHCLS( type )
Reads the AUTHLIB data set and returns a WHERE clause
Product: SAS/IntrNet
Document: SAS/IntrNet 9.3: Application Dispatcher
RC = APPSRV_AUTHDS( dataset )
Enables the user to change the AUTHLIB data set name
Product: SAS/IntrNet
Document: SAS/IntrNet 9.3: Application Dispatcher
RC = APPSRV_AUTHLIB( < libname > <, memname > <, memtype > <, objname > <, objtype > )
Determines whether the Application Server program is authorized to access a specified data source
Product: SAS/IntrNet
Document: SAS/IntrNet 9.3: Application Dispatcher
OLD-HEADER = APPSRV_HEADER( Header Name , Header Value );
The DATA step function used to add or modify a header
Product: SAS/IntrNet
Document: SAS/IntrNet 9.3: Application Dispatcher
RC = APPSRV_SESSION( ' command ' <, timeout >)
Creates or deletes a session
Product: SAS/IntrNet
Document: SAS/IntrNet 9.3: Application Dispatcher
VALUE = APPSRV_UNSAFE( valuecode )
Returns the character value of a PROC APPSRV parameter setting
Product: SAS/IntrNet
Document: SAS/IntrNet 9.3: Application Dispatcher
VALUE=APPSRVGETC( valuecode )
Returns the character value of a PROC APPSRV parameter setting
Product: SAS/IntrNet
Document: SAS/IntrNet 9.3: Application Dispatcher
VALUE=APPSRVGETN( valuecode )
Returns the numeric value of a PROC APPSRV parameter setting
Product: SAS/IntrNet
Document: SAS/IntrNet 9.3: Application Dispatcher
RC=APPSRVSET( valuecode , newvalue )
Returns the numeric value of a PROC APPSRV parameter setting
Product: SAS/IntrNet
Document: SAS/IntrNet 9.3: Application Dispatcher