The PROBIT Procedure

LPREDPLOT Statement

Subsections:

Summary of Options
Dictionary of Options

LPREDPLOT <VAR=variable> <options>;

The LPREDPLOT statement plots the linear predictor (LPRED) $\mb{x}^{\prime }\mb{b}$ against a single continuous variable (dose variable) in the MODEL statement for either the binomial model or the multinomial model. The confidence limits for the predicted values are available only for the binomial model.

VAR= variable

specifies a single continuous variable (dose variable) in the independent variable list of the MODEL statement for which the linear predictor plot is plotted. If a VAR= variable is not specified, the first single continuous variable in the independent variable list of the MODEL statement is used. If such a variable does not exist in the independent variable list of the MODEL statement, an error is reported.

Let $x_1$ be the covariate of the dose variable, $\mb{x}_{-1}$ be the vector of the rest of the covariates, ${\mb{\hat b}}_{-1}$ be the vector of estimated parameters corresponding to $\mb{x}_{-1}$ , and ${\hat b}_1$ be the estimated parameter for the dose variable of interest.

To plot ${\mb{\hat x}}^{\prime }\mb{b}$ as a function of $x_1$ , $\mb{x}_{-1}$ must be specified. You can use the XDATA= option to provide the values of $\mb{x}_{-1}$ (see the XDATA= option in the PROC PROBIT statement for details), or use the default values that follow these rules:

If the effect contains a continuous variable (or variables), the overall mean of this effect is used.
If the effect is a single classification variable, the highest level of the variable is used.

options

add features to the plot.

For the multinomial model, you can use the LEVEL= option to specify the levels for which the linear predictor lines are plotted. The lines are labeled by the names of their levels in the middle.

You can use options in the LPREDPLOT statement to do the following:

superimpose specification limits
suppress or add the observed data points on the plot for the binomial model
suppress or add the confidence limits for the binomial model
specify the levels for which the linear predictor lines are requested for the multinomial model
specify graphical enhancements (such as color or text height)

Summary of Options

Table 93.22 through Table 93.28 list all options by function. The Dictionary of Options describes each option in detail.

LPRED Options

Table 93.22: Plot Layout Options for LPREDPLOT

LEVEL=(character-list)	Specifies the names of the levels for which the linear predictor lines are requested (only for the multinomial model )
NOCONF	Suppresses fiducial limits (only for the binomial model)
NODATA	Suppresses observed data points on the plot (only for the binomial model)
NOTHRESH	Suppresses the threshold line
THRESHLABPOS=value	Specifies the position for the label of the threshold line

General Options

Table 93.23: Color Options

CAXIS=color	Specifies color for axis
CFIT=color	Specifies color for fitted curves
CFRAME=color	Specifies color for frame
CGRID=color	Specifies color for grid lines
CHREF=color	Specifies color for HREF= lines
CTEXT=color	Specifies color for text
CVREF=color	Specifies color for VREF= lines

Table 93.24: Options to Enhance Plots Produced on Graphics Devices

ANNOTATE=SAS-data-set	Specifies an Annotate data set
INBORDER	Requests a border around plot
LFIT=linetype	Specifies line style for fitted curves and confidence limits
LGRID=linetype	Specifies line style for grid lines
NOFRAME	Suppresses the frame around plotting areas
NOGRID	Suppresses grid lines
NOFIT	Suppresses fitted curves
NOHLABEL	Suppresses horizontal labels
NOHTICK	Suppresses horizontal ticks
NOVTICK	Suppresses vertical ticks
TURNVLABELS	Vertically strings out characters in vertical labels
WFIT=n	Specifies thickness for fitted curves
WGRID=n	Specifies thickness for grids
WREFL=n	Specifies thickness for reference lines

Table 93.25: Axis Options

HAXIS=value1 to value2 <by value3>	Specifies tick mark values for horizontal axis
HOFFSET=value	Specifies offset for horizontal axis
HLOWER=value	Specifies lower limit on horizontal axis scale
HUPPER=value	Specifies upper limit on horizontal axis scale
NHTICK=n	Specifies number of ticks for horizontal axis
NVTICK=n	Specifies number of ticks for vertical axis
VAXIS=value1 to value2 <by value3>	Specifies tick mark values for vertical axis
VAXISLABEL='label'	Specifies label for vertical axis
VOFFSET=value	Specifies offset for vertical axis
VLOWER=value	Specifies lower limit on vertical axis scale
VUPPER=value	Specifies upper limit on vertical axis scale
WAXIS=n	Specifies thickness for axis

Table 93.26: Graphics Catalog Options

DESCRIPTION='string'	Specifies description for graphics catalog member
NAME='string'	Specifies name for plot in graphics catalog

Table 93.27: Options for Text Enhancement

FONT=font	Specifies software font for text
HEIGHT=value	Specifies height of text used outside framed areas
INHEIGHT=value	Specifies height of text inside framed areas

Table 93.28: Options for Reference Lines

HREF<(INTERSECT)>=value-list	Requests horizontal reference line
HREFLABELS=('label1',…,'labeln')	Specifies labels for HREF= lines
HREFLABPOS=n	Specifies vertical position of labels for HREF= lines
LHREF=linetype	Specifies line style for HREF= lines
LVREF=linetype	Specifies line style for VREF= lines
VREF<(INTERSECT)>=value-list	Requests vertical reference line
VREFLABELS=('label1',…,'labeln')	Specifies labels for VREF= lines
VREFLABPOS=n	Specifies horizontal position of labels for VREF= lines

Dictionary of Options

The following entries provide detailed descriptions of the options in the LPREDPLOT statement.

ANNOTATE=SAS-data-set ANNO=SAS-data-set

specifies an Annotate data set, as described in SAS/GRAPH: Reference, that enables you to add features to the LPRED plot. The ANNOTATE= data set you specify in the LPREDPLOT statement is used for all plots created by the statement.

CAXIS=color CAXES=color

specifies the color used for the axes and tick marks. This option overrides any COLOR= specifications in an AXIS statement. The default is the first color in the device color list.

CFIT=color

specifies the color for the fitted LPRED lines. The default is the first color in the device color list.

CFRAME=color CFR=color

specifies the color for the area enclosed by the axes and frame. This area is not shaded by default.

CGRID=color

specifies the color for grid lines. The default is the first color in the device color list.

CHREF=color CH=color

specifies the color for lines requested by the HREF= option. The default is the first color in the device color list.

CTEXT=color

specifies the color for tick mark values and axis labels. The default is the color specified for the CTEXT= option in the most recent GOPTIONS statement.

CVREF=color CV=color

specifies the color for lines requested by the VREF= option. The default is the first color in the device color list.

DESCRIPTION='string' DES='string'

specifies a description, up to 40 characters, that appears in the PROC GREPLAY master menu. The default is the variable name.

FONT=font

specifies a software font for reference line and axis labels. You can also specify fonts for axis labels in an AXIS statement. The FONT= font takes precedence over the FTEXT= font specified in the most recent GOPTIONS statement. Hardware characters are used by default.

HAXIS=value1 to value2 <by value3>

specifies tick mark values for the horizontal axis; value1, value2, and value3 must be numeric, and value1 must be less than value2. The lower tick mark is value1. Tick marks are drawn at increments of value3. The last tick mark is the greatest value that does not exceed value2. If value3 is omitted, a value of 1 is used.

Examples of HAXIS= lists follow:

   haxis = 0 to 10
   haxis = 2 to 10 by 2
   haxis = 0 to 200 by 10

HEIGHT=value

specifies the height of text used outside framed areas. The default value is 3.846 (in percentage).

HLOWER=value

specifies the lower limit on the horizontal axis scale. The HLOWER= option specifies value as the lower horizontal axis tick mark. The tick mark interval and the upper axis limit are determined automatically. This option has no effect if the HAXIS= option is used.

HOFFSET=value

specifies offset for horizontal axis. The default value is 1.

HUPPER=value

specifies value as the upper horizontal axis tick mark. The tick mark interval and the lower axis limit are determined automatically. This option has no effect if the HAXIS= option is used.

HREF <(INTERSECT)> =value-list

requests reference lines perpendicular to the horizontal axis. If (INTERSECT) is specified, a second reference line perpendicular to the vertical axis is drawn that intersects the fit line at the same point as the horizontal axis reference line. If a horizontal axis reference line label is specified, the intersecting vertical axis reference line is labeled with the vertical axis value. See also the CHREF=, HREFLABELS=, and LHREF= options.

HREFLABELS='label1',…,'labeln' HREFLABEL='label1',…,'labeln' HREFLAB='label1',…,'labeln'

specifies labels for the lines requested by the HREF= option. The number of labels must equal the number of lines. Enclose each label in quotes. Labels can be up to 16 characters.

HREFLABPOS=n

specifies the vertical position of labels for HREF= lines. The following table shows valid values for n and the corresponding label placements.

n	Label Placement
1	Top
2	Staggered from top
3	Bottom
4	Staggered from bottom
5	Alternating from top
6	Alternating from bottom

INBORDER

requests a border around LPRED plots.

INHEIGHT=value

Specifies height of text inside framed areas.

LEVEL=(character-list) ORDINAL=(character-list)

specifies the names of the levels for which linear predictor lines are requested. Names should be quoted and separated by space. If there is no correct name provided, no LPRED line is plotted.

LFIT=linetype

specifies a line style for fitted curves and confidence limits. By default, fitted curves are drawn by connecting solid lines (linetype = 1) and confidence limits are drawn by connecting dashed lines (linetype = 3).

LGRID=linetype

specifies a line style for all grid lines. The value for linetype is between 1 and 46. The default is 35.

LHREF=linetype LH=linetype

specifies the line type for lines requested by the HREF= option. The default is 2, which produces a dashed line.

LVREF=linetype LV=linetype

specifies the line type for lines requested by the VREF= option. The default is 2, which produces a dashed line.

NAME='string'

specifies a name for the plot, up to eight characters, that appears in the PROC GREPLAY master menu. The default is ’PROBIT’.

NHTICK=n

Specifies number of ticks for horizontal axis.

NVTICK=n

Specifies number of ticks for vertical axis.

NOCONF

suppresses confidence limits from the plot. This works only for the binomial model. Confidence limits are not plotted for the multinomial model.

NODATA

suppresses observed data points from the plot. This works only for the binomial model. Data points are not plotted for the multinomial model.

NOFIT

suppresses the fitted LPRED lines.

NOFRAME

suppresses the frame around plotting areas.

NOGRID

suppresses grid lines.

NOHLABEL

suppresses horizontal labels.

NOHTICK

suppresses horizontal tick marks.

NOTHRESH

suppresses the threshold line.

NOVLABEL

suppresses vertical labels.

NOVTICK

suppresses vertical tick marks.

TURNVLABELS

vertically strings out characters in vertical labels.

THRESHLABPOS=n

specifies the horizontal position of labels for the threshold line. The following table shows valid values for n and the corresponding label placements.

n	Label Placement
1	Left
2	Right

VAXIS=value1 to value2 <by value3>

specifies tick mark values for the vertical axis; value1, value2, and value3 must be numeric, and value1 must be less than value2. The lower tick mark is value1. Tick marks are drawn at increments of value3. The last tick mark is the greatest value that does not exceed value2. This method of specification of tick marks is not valid for logarithmic axes. If value3 is omitted, a value of 1 is used.

Examples of VAXIS= lists follow:

   vaxis = 0 to 10
   vaxis = 0 to 2 by .1

VAXISLABEL='string'

specifies a label for the vertical axis.

VLOWER=value

specifies the lower limit on the vertical axis scale. The VLOWER= option specifies value as the lower vertical axis tick mark. The tick mark interval and the upper axis limit are determined automatically. This option has no effect if the VAXIS= option is used.

VOFFSET=value

specifies the offset for the vertical axis.

VREF=value-list

requests reference lines perpendicular to the vertical axis. If (INTERSECT) is specified, a second reference line perpendicular to the horizontal axis is drawn that intersects the fit line at the same point as the vertical axis reference line. If a vertical axis reference line label is specified, the intersecting horizontal axis reference line is labeled with the horizontal axis value. See also the CVREF=, LVREF=, and VREFLABELS= options.

VREFLABELS='label1',…,'labeln' VREFLABEL='label1',…,'labeln' VREFLAB='label1',…,'labeln'

specifies labels for the lines requested by the VREF= option. The number of labels must equal the number of lines. Enclose each label in quotes. Labels can be up to 16 characters.

VREFLABPOS=n

specifies the horizontal position of labels for VREF= lines. The following table shows valid values for n and the corresponding label placements.

n	Label Placement
1	Left
2	Right

VUPPER=number

specifies the upper limit on the vertical axis scale. The VUPPER= option specifies number as the upper vertical axis tick mark. The tick mark interval and the lower axis limit are determined automatically. This option has no effect if the VAXIS= option is used.

WAXIS=n

specifies line thickness for axes and frame. The default value is 1.

WFIT=n

specifies line thickness for fitted lines. The default value is 1.

WGRID=n

specifies line thickness for grids. The default value is 1.

WREFL=n

specifies line thickness for reference lines. The default value is 1.