PROC CAPABILITY: Summary of Options

Summary of Options

The following tables list the HISTOGRAM statement options by function. For detailed descriptions, see Dictionary of Options.

Parametric Density Estimation Options

Table 5.18 lists options that display a parametric density estimate on the histogram.

Table 5.18 Parametric Distribution Options
Option	Description
BETA(beta-options)	fits beta distribution with threshold parameter $\text{[math]}$ , scale parameter $\text{[math]}$ , and shape parameters $\text{[math]}$ and $\text{[math]}$
EXPONENTIAL(exponential-options)	fits exponential distribution with threshold parameter $\text{[math]}$ and scale parameter $\text{[math]}$
GAMMA(gamma-options)	fits gamma distribution with threshold parameter $\text{[math]}$ , scale parameter $\text{[math]}$ , and shape parameter $\text{[math]}$
GUMBEL(Gumbel-options)	plots Gumbel distribution with location parameter $\text{[math]}$ and scale parameter $\text{[math]}$
IGAUSS(iGauss-options)	plots inverse Gaussian distribution with mean $\text{[math]}$ and shape parameter $\text{[math]}$
LOGNORMAL(lognormal-options)	fits lognormal distribution with threshold parameter $\text{[math]}$ , scale parameter $\text{[math]}$ , and shape parameter $\text{[math]}$
NORMAL(normal-options)	fits normal distribution with mean $\text{[math]}$ and standard deviation $\text{[math]}$
PARETO(Pareto-options)	plots Pareto distribution with threshold parameter $\text{[math]}$ , scale parameter $\text{[math]}$ , and shape parameter $\text{[math]}$
POWER(power-options)	plots power function distribution with threshold parameter $\text{[math]}$ , scale parameter $\text{[math]}$ , and shape parameter $\text{[math]}$
RAYLEIGH(Rayleigh-options)	plots Rayleigh distribution with threshold parameter $\text{[math]}$ and scale parameter $\text{[math]}$
SB(SB-options)	fits Johnson $\text{[math]}$ distribution with threshold parameter $\text{[math]}$ , scale parameter $\text{[math]}$ , and shape parameters $\text{[math]}$ and $\text{[math]}$
SU(SU-options)	fits Johnson $\text{[math]}$ distribution with location parameter $\text{[math]}$ , scale parameter $\text{[math]}$ , and shape parameters $\text{[math]}$ and $\text{[math]}$
WEIBULL(Weibull-options)	fits Weibull distribution with threshold parameter $\text{[math]}$ , scale parameter $\text{[math]}$ , and shape parameter $\text{[math]}$

Table 5.19 lists secondary options that specify parameters for fitted parametric distributions and that control the display of fitted curves. Specify these secondary options in parentheses after the distribution keyword. For example, the following statements fit a normal curve by using the NORMAL option:

proc capability;
   histogram / normal(color=red mu=10 sigma=0.5);
run;

The COLOR= normal-option draws the curve in red, and the MU= and SIGMA= normal-options specify the parameters $\text{[math]}$ and $\text{[math]}$ for the curve. Note that the sample mean and sample standard deviation are used to estimate $\text{[math]}$ and $\text{[math]}$ , respectively, when the MU= and SIGMA= options are not specified.

You can specify lists of values for distribution parameters to display more than one fitted curve from the same distribution family on a histogram. Option values are matched by list position. You can specify the value EST in a list of distribution parameter values to use an estimate of the parameter.

For example, the following code displays two normal curves on a histogram:

proc capability;
   histogram / normal(color=(red blue) mu=10 est sigma=0.5 est);
run;

The first curve is red, with $\text{[math]}$ and $\text{[math]}$ . The second curve is blue, with $\text{[math]}$ equal to the sample mean and $\text{[math]}$ equal to the sample standard deviation.

See the section Formulas for Fitted Curves for detailed information about the families of parametric distributions that you can fit with the HISTOGRAM statement.

Table 5.19 Distribution Options
Option	Description
Options Used with All Parametric Distributions
COLOR=	specifies color of fitted density curve
FILL	fills area under fitted density curve
INDICES	calculates capability indices based on fitted distribution
L=	specifies line type of fitted curve
MIDPERCENTS	prints table of midpoints of histogram intervals
NOPRINT	suppresses printed output summarizing fitted curve
PERCENTS=	lists percents for which quantiles calculated from data and quantiles estimated from fitted curve are tabulated
SYMBOL=	specifies character used for fitted density curve in line printer plots
W=	specifies width of fitted density curve
Beta-Options
ALPHA=	specifies first shape parameter $\text{[math]}$ for fitted beta curve
BETA=	specifies second shape parameter $\text{[math]}$ for fitted beta curve
SIGMA=	specifies scale parameter $\text{[math]}$ for fitted beta curve
THETA=	specifies lower threshold parameter $\text{[math]}$ for fitted beta curve
Exponential-Options
SIGMA=	specifies scale parameter $\text{[math]}$ for fitted exponential curve
THETA=	specifies threshold parameter $\text{[math]}$ for fitted exponential curve
Gamma-Options
ALPHA=	specifies shape parameter $\text{[math]}$ for fitted gamma curve
ALPHADELTA=	specifies change in successive estimates of $\text{[math]}$ at which the Newton-Raphson approximation of $\text{[math]}$ terminates
ALPHAINITIAL=	specifies initial value for $\text{[math]}$ in Newton-Raphson approximation of $\text{[math]}$
MAXITER=	specifies maximum number of iterations in Newton-Raphson approximation of $\text{[math]}$
SIGMA=	specifies scale parameter $\text{[math]}$ for fitted gamma curve
THETA=	specifies threshold parameter $\text{[math]}$ for fitted gamma curve
Gumbel-Options
EDFNSAMPLES=	specifies number of samples for EDF goodness-of-fit simulation
EDFSEED=	specifies seed value for EDF goodness-of-fit simulation
MU=	specifies location parameter $\text{[math]}$ for fitted Gumbel curve
SIGMA=	specifies scale parameter $\text{[math]}$ for fitted Gumbel curve
IGauss-Options
EDFNSAMPLES=	specifies number of samples for EDF goodness-of-fit simulation
EDFSEED=	specifies seed value for EDF goodness-of-fit simulation
LAMBDA=	specifies shape parameter $\text{[math]}$ for fitted inverse Gaussian curve
MU=	specifies mean $\text{[math]}$ for fitted inverse Gaussian curve
Lognormal-Options
SIGMA=	specifies shape parameter $\text{[math]}$ for fitted lognormal curve
THETA=	specifies threshold parameter $\text{[math]}$ for fitted lognormal curve
ZETA=	specifies scale parameter $\text{[math]}$ for fitted lognormal curve
Normal-Options
MU=	specifies mean $\text{[math]}$ for fitted normal curve
SIGMA=	specifies standard deviation $\text{[math]}$ for fitted normal curve
Pareto-Options
ALPHA=	specifies shape parameter $\text{[math]}$ for fitted Pareto curve
EDFNSAMPLES=	specifies number of samples for EDF goodness-of-fit simulation
EDFSEED=	specifies seed value for EDF goodness-of-fit simulation
SIGMA=	specifies scale parameter $\text{[math]}$ for fitted Pareto curve
THETA=	specifies threshold parameter $\text{[math]}$ for fitted Pareto curve
Power-Options
ALPHA=	specifies shape parameter $\text{[math]}$ for fitted power function curve
SIGMA=	specifies scale parameter $\text{[math]}$ for fitted power function curve
THETA=	specifies threshold parameter $\text{[math]}$ for fitted power function curve
Rayleigh-Options
EDFNSAMPLES=	specifies number of samples for EDF goodness-of-fit simulation
EDFSEED=	specifies seed value for EDF goodness-of-fit simulation
SIGMA=	specifies scale parameter $\text{[math]}$ for fitted Rayleigh curve
THETA=	specifies threshold parameter $\text{[math]}$ for fitted Rayleigh curve
$\text{[math]}$ -Options
DELTA=	specifies first shape parameter $\text{[math]}$ for fitted $\text{[math]}$ curve
FITINTERVAL=	specifies $\text{[math]}$ -value for method of percentiles
FITMETHOD=	specifies method of parameter estimation
FITTOLERANCE=	specifies tolerance for method of percentiles
GAMMA=	specifies second shape parameter $\text{[math]}$ for fitted $\text{[math]}$ curve
SIGMA=	specifies scale parameter $\text{[math]}$ for fitted $\text{[math]}$ curve
THETA=	specifies lower threshold parameter $\text{[math]}$ for fitted $\text{[math]}$ curve
$\text{[math]}$ -Options
DELTA=	specifies first shape parameter $\text{[math]}$ for fitted $\text{[math]}$ curve
FITINTERVAL=	specifies $\text{[math]}$ -value for method of percentiles
FITMETHOD=	specifies method of parameter estimation
FITTOLERANCE=	specifies tolerance for method of percentiles
GAMMA=	specifies second shape parameter $\text{[math]}$ for fitted $\text{[math]}$ curve
SIGMA=	specifies scale parameter $\text{[math]}$ for fitted $\text{[math]}$ curve
THETA=	specifies location parameter $\text{[math]}$ for fitted $\text{[math]}$ curve
Weibull-Options
C=	specifies shape parameter c for fitted Weibull curve
CDELTA=	specifies change in successive estimates of $\text{[math]}$ at which the Newton-Raphson approximation of $\text{[math]}$ terminates
CINITIAL=	specifies initial value for c in Newton-Raphson approximation of $\text{[math]}$
MAXITER=	specifies maximum number of iterations in Newton-Raphson approximation of $\text{[math]}$
SIGMA=	specifies scale parameter $\text{[math]}$ for fitted Weibull curve
THETA=	specifies threshold parameter $\text{[math]}$ for fitted Weibull curve

Nonparametric Density Estimation Options

Table 5.20 Kernel Density Estimation Options
Option	Description
KERNEL(kernel-options)	fits kernel density estimates

Specify the options listed in Table 5.21 in parentheses after the keyword KERNEL to control features of kernel density estimates requested with the KERNEL option.

Table 5.21 Kernel-Options
Option	Description
C=	specifies standardized bandwidth parameter $\text{[math]}$ for fitted kernel density estimate
COLOR=	specifies color of the fitted kernel density curve
FILL	fills area under fitted kernel density curve
K=	specifies type of kernel function
L=	specifies line type used for fitted kernel density curve
LOWER=	specifies lower bound for fitted kernel density curve
SYMBOL=	specifies character used for fitted kernel density curve in line printer plots
UPPER=	specifies upper bound for fitted kernel density curve
W=	specifies line width for fitted kernel density curve

General Options

Table 5.22 summarizes general options for the HISTOGRAM statement, including options for enhancing charts and producing output data sets.

Table 5.22 General HISTOGRAM Statement Options
Option	Description
Options to Create Output Data Sets
OUTFIT=	requests information about fitted curves
OUTHISTOGRAM=	requests information about histogram intervals
OUTKERNEL=	creates a data set containing kernel density estimates
General Histogram Layout Options
CONTENTS=	specifies table of contents entry for histogram grouping
CURVELEGEND=	specifies LEGEND statement for curves
ENDPOINTS=	lists endpoints for histogram intervals
HANGING	constructs hanging histogram
HREF=	specifies reference lines perpendicular to the horizontal axis
HREFLABELS=	specifies labels for HREF= lines
MIDPERCENTS	prints table of histogram intervals
MIDPOINTS=	lists midpoints for histogram intervals
NENDPOINTS=	specifies number of histogram interval endpoints
NMIDPOINTS=	specifies number of histogram interval midpoints
NOBARS	suppresses histogram bars
NOCURVELEGEND	suppresses legend for curves
NOFRAME	suppresses frame around plotting area
NOLEGEND	suppresses legend
NOPLOT	suppresses plot
NOSPECLEGEND	suppresses specifications legend
NOTABCONTENTS	suppresses table of contents entries for tables produced by HISTOGRAM statement
RTINCLUDE	includes right endpoint in interval
SPECLEGEND=	specifies LEGEND statement for specification limits
VREF=	specifies reference lines perpendicular to the vertical axis
VREFLABELS=	specifies labels for VREF= lines
VSCALE=	specifies scale for vertical axis
Options to Enhance Graphical Output
ANNOTATE=	specifies annotate data set
BARLABEL=	produces labels above histogram bars
BARWIDTH=	specifies width for the bars
BMCFILL=	specifies fill color for box-and-whisker plot in bottom margin
BMCFRAME=	specifies fill color bottom margin plot frame
BMCOLOR=	specifies color for bottom margin plot
BMMARGIN=	specifies height of margin for bottom margin plot
BMPLOT=	requests a plot in bottom margin of histogram
CAXIS=	specifies color for axis
CBARLINE=	specifies color for outlines of histogram bars
CFILL=	specifies color for filling under curve
CFRAME=	specifies color for frame
CGRID=	specifies color for grid lines
CHREF=	specifies color for HREF= lines
CLIPREF	draws reference lines behind histogram bars
CLIPSPEC=	clips histogram bars at specification limits
CTEXT=	specifies color for text
CVREF=	specifies color for VREF= lines
DESCRIPTION=	specifies description for plot in graphics catalog
FONT=	specifies software font for text
FRONTREF	draws reference lines in front of histogram bars
GRID	creates a grid
HAXIS=	specifies AXIS statement for horizontal axis
HEIGHT=	specifies height of text used outside framed areas
HMINOR=	specifies number of horizontal minor tick marks
HOFFSET=	specifies offset for horizontal axis
HREFLABPOS=	specifies vertical position of labels for HREF= lines
INFONT=	specifies software font for text inside framed areas
INHEIGHT=	specifies height of text inside framed areas
INTERBAR=	specifies space between histogram bars
LEGEND=	identifies LEGEND statement
LGRID=	specifies a line type for grid lines
LHREF=	specifies line style for HREF= lines
LVREF=	specifies line style for VREF= lines
MAXNBIN=	specifies maximum number of bins to display
MAXSIGMAS=	limits the number of bins that display to within a specified number of standard deviations above and below mean of data in key cell
MIDPOINTS=	specifies midpoints for histogram intervals
NAME=	specifies name for plot in graphics catalog
NOHLABEL	suppresses label for horizontal axis
NOVLABEL	suppresses label for vertical axis
NOVTICK	suppresses tick marks and tick mark labels for vertical axis
PFILL=	specifies pattern for filling under curve
TURNVLABELS	turns and vertically strings out characters in labels for vertical axis
VAXIS=	specifies AXIS statement or values for vertical axis
VAXISLABEL=	specifies label for vertical axis
VMINOR=	specifies number of vertical minor tick marks
VOFFSET=	specifies length of offset at upper end of vertical axis
VREFLABPOS=	specifies horizontal position of labels for VREF= lines
WAXIS=	specifies line thickness for axes and frame
WBARLINE=	specifies line thickness for bar outlines
WGRID=	specifies line thickness for grid
Options for Comparative Plots
ANNOKEY	applies annotation requested in ANNOTATE= data set to key cell only
CFRAMESIDE=	specifies color for filling frame for row labels
CFRAMETOP=	specifies color for filling frame for column labels
CPROP=	specifies color for proportion of frequency bar
CTEXTSIDE=	specifies color for row labels of comparative histograms
CTEXTTOP=	specifies color for column labels of comparative histograms
INTERTILE=	specifies distance between tiles
NCOLS=	specifies number of columns in comparative histogram
NROWS=	specifies number of rows in comparative histogram
Options to Enhance Line Printer Plots
HREFCHAR=	specifies line character for HREF= lines
VREFCHAR=	specifies line character for VREF= lines

HISTOGRAM Statement: CAPABILITY Procedure

Summary of Options

Parametric Density Estimation Options

Nonparametric Density Estimation Options

General Options