The MI Procedure

Getting Started: MI Procedure

The Fitness data described in the REG procedure are measurements of 31 individuals in a physical fitness course. See Chapter 79: The REG Procedure, for more information.

The Fitness1 data set is constructed from the Fitness data set and contains three variables: Oxygen, RunTime, and RunPulse. Some values have been set to missing, and the resulting data set has an arbitrary pattern of missingness in these three variables.

*---------------------Data on Physical Fitness-------------------------*
| These measurements were made on men involved in a physical fitness   |
| course at N.C. State University. Certain values have been set to     |
| missing and the resulting data set has an arbitrary missing pattern. |
| Only selected variables of                                           |
| Oxygen (intake rate, ml per kg body weight per minute),              |
| Runtime (time to run 1.5 miles in minutes),                          |
| RunPulse (heart rate while running) are used.                        |
*----------------------------------------------------------------------*;
data Fitness1;
   input Oxygen RunTime RunPulse @@;
   datalines;
44.609  11.37  178     45.313  10.07  185
54.297   8.65  156     59.571    .      .
49.874   9.22    .     44.811  11.63  176
  .     11.95  176          .  10.85    .
39.442  13.08  174     60.055   8.63  170
50.541    .      .     37.388  14.03  186
44.754  11.12  176     47.273    .      .
51.855  10.33  166     49.156   8.95  180
40.836  10.95  168     46.672  10.00    .
46.774  10.25    .     50.388  10.08  168
39.407  12.63  174     46.080  11.17  156
45.441   9.63  164       .      8.92    .
45.118  11.08    .     39.203  12.88  168
45.790  10.47  186     50.545   9.93  148
48.673   9.40  186     47.920  11.50  170
47.467  10.50  170
;

Suppose that the data are multivariate normally distributed and the missing data are missing at random (MAR). That is, the probability that an observation is missing can depend on the observed variable values of the individual, but not on the missing variable values of the individual. See the section Statistical Assumptions for Multiple Imputation for a detailed description of the MAR assumption.

The following statements invoke the MI procedure and impute missing values for the Fitness1 data set:

proc mi data=Fitness1 seed=501213 mu0=50 10 180 out=outmi;
   mcmc;
   var Oxygen RunTime RunPulse;
run;

The Model Information table in Figure 57.1 describes the method used in the multiple imputation process. By default, the MCMC statement uses the Markov chain Monte Carlo (MCMC) method with a single chain to create five imputations. The posterior mode, the highest observed-data posterior density, with a noninformative prior, is computed from the expectation-maximization (EM) algorithm and is used as the starting value for the chain.

Figure 57.1: Model Information

The MI Procedure

Model Information
Data Set WORK.FITNESS1
Method MCMC
Multiple Imputation Chain Single Chain
Initial Estimates for MCMC EM Posterior Mode
Start Starting Value
Prior Jeffreys
Number of Imputations 5
Number of Burn-in Iterations 200
Number of Iterations 100
Seed for random number generator 501213


The MI procedure takes 200 burn-in iterations before the first imputation and 100 iterations between imputations. In a Markov chain, the information in the current iteration influences the state of the next iteration. The burn-in iterations are iterations in the beginning of each chain that are used both to eliminate the series of dependence on the starting value of the chain and to achieve the stationary distribution. The between-imputation iterations in a single chain are used to eliminate the series of dependence between the two imputations.

The Missing Data Patterns table in Figure 57.2 lists distinct missing data patterns with their corresponding frequencies and percentages. An X means that the variable is observed in the corresponding group, and a . means that the variable is missing. The table also displays group-specific variable means. The MI procedure sorts the data into groups based on whether the analysis variables are observed or missing. For a detailed description of missing data patterns, see the section Missing Data Patterns.

Figure 57.2: Missing Data Patterns

Missing Data Patterns
Group Oxygen RunTime RunPulse Freq Percent Group Means
Oxygen RunTime RunPulse
1 X X X 21 67.74 46.353810 10.809524 171.666667
2 X X . 4 12.90 47.109500 10.137500 .
3 X . . 3 9.68 52.461667 . .
4 . X X 1 3.23 . 11.950000 176.000000
5 . X . 2 6.45 . 9.885000 .


After the completion of m imputations, the Variance Information table in Figure 57.3 displays the between-imputation variance, within-imputation variance, and total variance for combining complete-data inferences. It also displays the degrees of freedom for the total variance. The relative increase in variance due to missing values, the fraction of missing information, and the relative efficiency (in units of variance) for each variable are also displayed. A detailed description of these statistics is provided in the section Combining Inferences from Multiply Imputed Data Sets.

Figure 57.3: Variance Information

Variance Information
Variable Variance DF Relative
Increase
in Variance
Fraction
Missing
Information
Relative
Efficiency
Between Within Total
Oxygen 0.056930 0.954041 1.022356 25.549 0.071606 0.068898 0.986408
RunTime 0.000811 0.064496 0.065469 27.721 0.015084 0.014968 0.997015
RunPulse 0.922032 3.269089 4.375528 15.753 0.338455 0.275664 0.947748


The Parameter Estimates table in Figure 57.4 displays the estimated mean and standard error of the mean for each variable. The inferences are based on the t distribution. The table also displays a 95% confidence interval for the mean and a t statistic with the associated p-value for the hypothesis that the population mean is equal to the value specified with the MU0= option. A detailed description of these statistics is provided in the section Combining Inferences from Multiply Imputed Data Sets.

Figure 57.4: Parameter Estimates

Parameter Estimates
Variable Mean Std Error 95% Confidence Limits DF Minimum Maximum Mu0 t for H0:
Mean=Mu0
Pr > |t|
Oxygen 47.094040 1.011116 45.0139 49.1742 25.549 46.783898 47.395550 50.000000 -2.87 0.0081
RunTime 10.572073 0.255870 10.0477 11.0964 27.721 10.526392 10.599616 10.000000 2.24 0.0336
RunPulse 171.787793 2.091776 167.3478 176.2278 15.753 170.774818 173.122002 180.000000 -3.93 0.0012


In addition to the output tables, the procedure also creates a data set with imputed values. The imputed data sets are stored in the outmi data set, with the index variable _Imputation_ indicating the imputation numbers. The data set can now be analyzed using standard statistical procedures with _Imputation_ as a BY variable.

The following statements list the first 10 observations of data set outmi:

proc print data=outmi (obs=10);
   title 'First 10 Observations of the Imputed Data Set';
run;

The table in Figure 57.5 shows that the precision of the imputed values differs from the precision of the observed values. You can use the ROUND= option to make the imputed values consistent with the observed values.

Figure 57.5: Imputed Data Set

First 10 Observations of the Imputed Data Set

Obs _Imputation_ Oxygen RunTime RunPulse
1 1 44.6090 11.3700 178.000
2 1 45.3130 10.0700 185.000
3 1 54.2970 8.6500 156.000
4 1 59.5710 8.0747 155.925
5 1 49.8740 9.2200 176.837
6 1 44.8110 11.6300 176.000
7 1 42.8857 11.9500 176.000
8 1 46.9992 10.8500 173.099
9 1 39.4420 13.0800 174.000
10 1 60.0550 8.6300 170.000