
COEFFPRIOR=UNIFORM  NORMAL <(normaloptions)>
CPRIOR=UNIFORM  NORMAL <(option)>
COEFF=UNIFORM  NORMAL <(option)>

specifies the prior distribution for the regression coefficients. The default is COEFFPRIOR=UNIFORM. The available prior distributions
are as follows:

NORMAL<(normaloption)>

specifies a normal distribution. The normaloptions include the following:

CONDITIONAL

specifies that the normal prior, conditional on the current Markov chain value of the locationscale model precision parameter
, is , where and are the mean and covariance of the normal prior specified by other normal options.

INPUT= SASdataset

specifies a SAS data set that contains the mean and covariance information of the normal prior. The data set must have a _TYPE_
variable to represent the type of each observation and a variable for each regression coefficient. If the data set also contains
a _NAME_
variable, the values of this variable are used to identify the covariances for the _TYPE_
=’COV’ observations; otherwise, the _TYPE_
=’COV’ observations are assumed to be in the same order as the explanatory variables in the MODEL statement. PROC LIFEREG
reads the mean vector from the observation with _TYPE_
=’MEAN’ and reads the covariance matrix from observations with _TYPE_
=’COV’. For an independent normal prior, the variances can be specified with _TYPE_
=’VAR’; alternatively, the precisions (inverse of the variances) can be specified with _TYPE_
=’PRECISION’.

RELVAR<=c>

specifies the normal prior , where is a diagonal matrix with diagonal elements equal to the variances of the corresponding ML estimator. By default, .

VAR<=c>

specifies the normal prior , where is the identity matrix.
If you do not specify an option, the normal prior , where is the identity matrix, is used. See the section Normal Prior for more details.

UNIFORM

specifies a flat prior—that is, the prior that is proportional to a constant ( for all ).

DIAGNOSTICS=ALL  NONE  (keywordlist)
DIAG=ALL  NONE  (keywordlist)

controls the number of diagnostics produced. You can request all the following diagnostics by specifying DIAGNOSTICS=ALL.
If you do not want any of these diagnostics, specify DIAGNOSTICS=NONE. If you want some but not all of the diagnostics, or
if you want to change certain settings of these diagnostics, specify a subset of the following keywords. The default is DIAGNOSTICS=(AUTOCORR ESS GEWEKE).

AUTOCORR <(LAGS= numericlist)>

computes the autocorrelations of lags given by LAGS= list for each parameter. Elements in the list are truncated to integers
and repeated values are removed. If the LAGS= option is not specified, autocorrelations of lags 1, 5, 10, and 50 are computed
for each variable. See the section Autocorrelations in Chapter 7: Introduction to Bayesian Analysis Procedures, for details.

ESS

computes Carlin’s estimate of the effective sample size, the correlation time, and the efficiency of the chain for each parameter.
See the section Effective Sample Size in Chapter 7: Introduction to Bayesian Analysis Procedures, for details.

GELMAN <(gelmanoptions)>

computes the Gelman and Rubin convergence diagnostics. You can specify one or more of the following gelmanoptions:

NCHAIN=number
N=number

specifies the number of parallel chains used to compute the diagnostic, and must be 2 or larger. The default is NCHAIN=3.
If an INITIAL= data set is used, NCHAIN defaults to the number of rows in the INITIAL= data set. If any number other than
this is specified with the NCHAIN= option, the NCHAIN= value is ignored.

ALPHA=value

specifies the significance level for the upper bound. The default is ALPHA=0.05, resulting in a 97.5% bound.
See the section Gelman and Rubin Diagnostics in Chapter 7: Introduction to Bayesian Analysis Procedures, for details.

GEWEKE <(gewekeoptions)>

computes the Geweke spectral density diagnostics, which are essentially a twosample t test between the first portion and the last portion of the chain. The default is and , but you can choose other fractions by using the following gewekeoptions:

FRAC1=value

specifies the fraction for the first window.

FRAC2=value

specifies the fraction for the second window.
See the section Geweke Diagnostics in Chapter 7: Introduction to Bayesian Analysis Procedures, for details.

HEIDELBERGER <(heideloptions)>

computes the Heidelberger and Welch diagnostic for each variable, which consists of a stationarity test of the null hypothesis
that the sample values form a stationary process. If the stationarity test is not rejected, a halfwidth test is then carried
out. Optionally, you can specify one or more of the following heideloptions:
See the section Heidelberger and Welch Diagnostics in Chapter 7: Introduction to Bayesian Analysis Procedures, for details.

MCSE
MCERROR

computes the Monte Carlo standard error for each parameter. The Monte Caro standard error, which measures the simulation accuracy,
is the standard error of the posterior mean estimate and is calculated as the posterior standard deviation divided by the
square root of the effective sample size. See the section Standard Error of the Mean Estimate in Chapter 7: Introduction to Bayesian Analysis Procedures, for details.

RAFTERY<(rafteryoptions)>

computes the Raftery and Lewis diagnostics that evaluate the accuracy of the estimated quantile ( for a given ) of a chain. can achieve any degree of accuracy when the chain is allowed to run for a long time. A stopping criterion is when the estimated
probability reaches within of the value Q with probability S; that is, . The following rafteryoptions enable you to specify , and a precision level for the test:

QUANTILE  Q=value

specifies the order (a value between 0 and 1) of the quantile of interest. The default is 0.025.

ACCURACY  R=value

specifies a small positive number as the margin of error for measuring the accuracy of estimation of the quantile. The default
is 0.005.

PROBABILITY  S=value

specifies the probability of attaining the accuracy of the estimation of the quantile. The default is 0.95.

EPSILON  EPS=value

specifies the tolerance level (a small positive number) for the stationary test. The default is 0.001.
See the section Raftery and Lewis Diagnostics in Chapter 7: Introduction to Bayesian Analysis Procedures, for details.

EXPSCALEPRIOR=GAMMA<(options)>  IMPROPER
ESCALEPRIOR=GAMMA<(options)>  IMPROPER
ESCPRIOR=GAMMA<(options)>  IMPROPER

specifies that Gibbs sampling be performed on the exponential distribution scale parameter and the prior distribution for
the scale parameter. This prior distribution applies only when the exponential distribution and no covariates are specified.
A gamma prior with density is specified by EXPSCALEPRIOR=GAMMA, which can be followed by one of the following gammaoptions enclosed in parentheses. The hyperparameters a and b are the shape and inversescale parameters of the gamma distribution, respectively. See the section Gamma Prior for more details. The default is .
An improper prior with density proportional to is specified with EXPSCALEPRIOR=IMPROPER.

GAMMASHAPEPRIOR=NORMAL<(options)>
GAMASHAPEPRIOR=NORMAL<(options)>
SHAPE1PRIOR=NORMAL<(options)>

specifies the prior distribution for the gamma distribution shape parameter. If you do not specify any options in a gamma
model, the prior for the shape is used. You can specify MEAN= and VAR= or RELVAR= options, either alone or together, to specify the
mean and variance of the normal prior for the gamma shape parameter.

INITIAL=SASdataset

specifies the SAS data set that contains the initial values of the Markov chains. The INITIAL= data set must contain all the
variables of the model. You can specify multiple rows as the initial values of the parallel chains for the GelmanRubin statistics,
but posterior summaries, diagnostics, and plots are computed only for the first chain. If the data set also contains the variable
_SEED_
, the value of the _SEED_
variable is used as the seed of the random number generator for the corresponding chain.

INITIALMLE

specifies that maximum likelihood estimates of the model parameters be used as initial values of the Markov chain. If this
option is not specified, estimates of the mode of the posterior distribution obtained by optimization are used as initial
values.

METROPOLIS=YES  NO

specifies the use of a Metropolis step to generate Gibbs samples for posterior distributions that are not log concave. The
default value is METROPOLIS=YES.

NBI=number

specifies the number of burnin iterations before the chains are saved. The default is 2000.

NMC=number

specifies the number of iterations after the burnin. The default is 10000.

OUTPOST=SASdataset
OUT=SASdataset

names the SAS data set that contains the posterior samples. See the section OUTPOST= Output Data Set for more information. Alternatively, you can create the output data set by specifying an ODS OUTPUT statement as follows:
ODS OUTPUT POSTERIORSAMPLE=SASdataset

PLOTS<(globalplotoptions)>= plotrequest
PLOTS<(globalplotoptions)>= (plotrequest < …plotrequest>)

controls the display of diagnostic plots. Three types of plots can be requested: trace plots, autocorrelation function plots,
and kernel density plots. By default, the plots are displayed in panels unless the global plot option UNPACK is specified.
Also, when specifying more than one type of plots, the plots are displayed by parameters unless the global plot option GROUPBY
is specified. When you specify only one plot request, you can omit the parentheses around the plot request. For example:
plots=none
plots(unpack)=trace
plots=(trace autocorr)
ODS Graphics must be enabled before plots can be requested. For example:
ods graphics on;
proc lifereg;
model y=x;
bayes plots=trace;
run;
ods graphics off;
For more information about enabling and disabling ODS Graphics, see the section Enabling and Disabling ODS Graphics in Chapter 21: Statistical Graphics Using ODS.
The globalplotoptions are as follows:

FRINGE

creates a fringe plot on the X axis of the density plot.

GROUPBY=PARAMETER  TYPE

specifies how the plots are grouped when there is more than one type of plot.

GROUPBY=TYPE

specifies that the plots be grouped by type.

GROUPBY=PARAMETER

specifies that the plots be grouped by parameter.
GROUPBY=PARAMETER is the default.

LAGS=n

specifies that autocorrelations be plotted up to lag n. If this option is not specified, autocorrelations are plotted up to lag 50.

SMOOTH

displays a fitted penalized Bspline curve for each trace plot.

UNPACKPANEL
UNPACK

specifies that all paneled plots be unpacked, meaning that each plot in a panel is displayed separately.
The plotrequests include the following:

ALL

specifies all types of plots. PLOTS=ALL is equivalent to specifying PLOTS=(TRACE AUTOCORR DENSITY).

AUTOCORR

displays the autocorrelation function plots for the parameters.

DENSITY

displays the kernel density plots for the parameters.

NONE

suppresses all diagnostic plots.

TRACE

displays the trace plots for the parameters. See the section Visual Analysis via Trace Plots in Chapter 7: Introduction to Bayesian Analysis Procedures, for details.

SCALEPRIOR=GAMMA<(options)>

specifies that Gibbs sampling be performed on the locationscale model scale parameter and the prior distribution for the
scale parameter.
A gamma prior with density is specified by SCALEPRIOR=GAMMA, which can be followed by one of the following gammaoptions enclosed in parentheses. The hyperparameters a and b are the shape and inversescale parameters of the gamma distribution, respectively. See the section Gamma Prior for details. The default is .

SEED=number

specifies an integer seed in the range 1 to for the random number generator in the simulation. Specifying a seed enables you to reproduce identical Markov chains for
the same specification. If the SEED= option is not specified, or if you specify a nonpositive seed, a random seed is derived
from the time of day.

STATISTICS <(globaloptions)> = ALL  NONE  keyword  (keywordlist)
STATS <(globalstatoptions)> = ALL  NONE  keyword  (keywordlist)

controls the number of posterior statistics produced.
Specifying STATISTICS=ALL is equivalent to specifying STATISTICS= (SUMMARY INTERVAL COV CORR). If you do not want any posterior
statistics, you specify STATISTICS=NONE. The default is STATISTICS=(SUMMARY INTERVAL). See the section Summary Statistics in Chapter 7: Introduction to Bayesian Analysis Procedures, for details. The globaloptions include the following:

ALPHA=numericlist

controls the probabilities of the credible intervals. The ALPHA= values must be between 0 and 1. Each ALPHA= value produces
a pair of 100(1–ALPHA)% equaltail and HPD intervals for each parameters. The default is ALPHA=0.05, which yields the 95%
credible intervals for each parameter.

PERCENT=numericlist

requests the percentile points of the posterior samples. The PERCENT= values must be between 0 and 100. The default is PERCENT=25,
50, 75, which yields the 25th, 50th, and 75th percentile points, respectively, for each parameter.
The list of keywords includes the following:

CORR

produces the posterior correlation matrix.

COV

produces the posterior covariance matrix.

SUMMARY

produces the means, standard deviations, and percentile points for the posterior samples. The default is to produce the 25th,
50th, and 75th percentile points, but you can use the global PERCENT= option to request specific percentile points.

INTERVAL

produces equaltail credible intervals and HPD intervals. The default is to produce the 95% equaltail credible intervals
and 95% HPD intervals, but you can use the global ALPHA= option to request intervals of any probabilities.

NONE

suppresses printing all summary statistics.

THINNING=number
THIN=number

controls the thinning of the Markov chain. Only one in every k
samples is used when THINNING=k, and if NBI= and NMC=n, the number of samples kept is
where [a] represents the integer part of the number a. The default is THINNING=1.

WEIBULLSCALEPRIOR=GAMMA<(options)>
WSCALEPRIOR=GAMMA<(options)>
WSCPRIOR=GAMMA<(options)>

specifies that Gibbs sampling be performed on the Weibull model scale parameter and the prior distribution for the scale parameter.
This option applies only when a Weibull distribution and no covariates are specified. When this option is specified, PROC
LIFEREG performs Gibbs sampling on the Weibull scale parameter, which is defined as , where is the intercept term.
A gamma prior is specified by WEIBULLSCALEPRIOR=GAMMA, which can be followed by one of the following gammaoptions enclosed in parentheses. The gamma probability density is given by . The hyperparameters a and b are the shape and inversescale parameters of the gamma distribution, respectively. See the section Gamma Prior for details about the gamma prior. The default is .

WEIBULLSHAPEPRIOR=GAMMA<(options)>
WSHAPEPRIOR=GAMMA<(options)>
WSHPRIOR=GAMMA<(options)>

specifies that Gibbs sampling be performed on the Weibull model shape parameter and the prior distribution for the shape parameter.
When this option is specified, PROC LIFEREG performs Gibbs sampling on the Weibull shape parameter, which is defined as , where is the locationscale model scale parameter.
A gamma prior with density is specified by WEIBULLSHAPEPRIOR=GAMMA, which can be followed by one of the following gammaoptions enclosed in parentheses. The hyperparameters a and b are the shape and inversescale parameters of the gamma distribution, respectively. See the section Gamma Prior for details about the gamma prior. The default is .