See Silverman (1986) or Scott (1992) for an introduction to nonparametric density estimation.
PROC MODECLUS uses hyperspherical uniform kernels of fixed or variable radius. The density estimate at a point is computed by dividing the number of observations within a sphere centered at the point by the product of the sample size and the volume of the sphere. The size of the sphere is determined by the smoothing parameters that you are required to specify.
For fixed-radius kernels, specify the radius as a Euclidean distance with either the DR= or R= option. For variable-radius kernels, specify the number of neighbors desired within the sphere with either the DK= or K= option; the radius is then the smallest radius that contains at least the specified number of observations including the observation at which the density is being estimated. If you specify both the DR= or R= option and the DK= or K= option, the radius used is the maximum of the two indicated radii; this is useful for dealing with outliers.
It is convenient to refer to the sphere of support of the kernel at observation as the neighborhood of . The observations within the neighborhood of are the neighbors of . In some contexts, is considered a neighbor of itself, but in other contexts it is not. The following notation is used in this chapter:
the ith observation
the distance between points x and y
the total number of observations in the sample
the number of observations within the neighborhood of , including itself
the number of observations within the neighborhood of , not including itself
the set of indices of neighbors of , including i
the set of indices of neighbors of , not including i
the volume of the neighborhood of
the radius of the neighborhood of
the estimated density at
the cross validated density estimate at
the set of indices of observations assigned to cluster k
the number of variables or the dimensionality
standard deviation of the lth variable
The estimated density at is
which indicates the number of neighbors of divided by the product of the sample size and the volume of the neighborhood at , where
and can be computed in a DATA step by using the GAMMA function. Note that for distance data.
The density estimates provided by uniform kernels are not quite as good as those provided by some other types of kernels, but they are quite satisfactory for clustering. The significance tests for the number of clusters require the use of fixed-size uniform kernels.
There is no simple answer to the question of which smoothing parameter to use (Silverman, 1986, pp. 43–61, 84–88, 98–99). It is usually necessary to try several different smoothing parameters. A reasonable first guess for the K= option is in the range of 0.1 to 1 times , smaller values being suitable for higher dimensionalities. A reasonable first guess for the R= option in many coordinate data sets is given by
which can be computed in a DATA step by using the GAMMA function for . The MODECLUS procedure also provides this first guess as a default smoothing parameter if none of the options (DR=, CR=, R=, DK=, CK=, and K= ) is specified. This formula is derived under the assumption that the data are sampled from a multivariate normal distribution and, therefore, tend to be too large (oversmooth) if the true distribution is multimodal. Robust estimates of the standard deviations might be preferable if there are outliers. If the data are distances, the factor can be replaced by an average root-mean-squared Euclidean distance divided by . To prevent outliers from appearing as separate clusters, you can also specify K=2 or CK=2 or, more generally, K=m or CK=m, , which in most cases forces clusters to have at least m members.
If the variables all have unit variance (for example, if you specify the STD option), you can use Table 60.2 to obtain an initial guess for the R= option.
Table 60.2: Reasonable First Guess for R= for Standardized Data
Number |
Number of Variables |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|
of Obs |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
20 |
1.01 |
1.36 |
1.77 |
2.23 |
2.73 |
3.25 |
3.81 |
4.38 |
4.98 |
5.60 |
35 |
0.91 |
1.24 |
1.64 |
2.08 |
2.56 |
3.08 |
3.62 |
4.18 |
4.77 |
5.38 |
50 |
0.84 |
1.17 |
1.56 |
1.99 |
2.46 |
2.97 |
3.50 |
4.06 |
4.64 |
5.24 |
75 |
0.78 |
1.09 |
1.47 |
1.89 |
2.35 |
2.85 |
3.38 |
3.93 |
4.50 |
5.09 |
100 |
0.73 |
1.04 |
1.41 |
1.82 |
2.28 |
2.77 |
3.29 |
3.83 |
4.40 |
4.99 |
150 |
0.68 |
0.97 |
1.33 |
1.73 |
2.18 |
2.66 |
3.17 |
3.71 |
4.27 |
4.85 |
200 |
0.64 |
0.93 |
1.28 |
1.67 |
2.11 |
2.58 |
3.09 |
3.62 |
4.17 |
4.75 |
350 |
0.57 |
0.85 |
1.18 |
1.56 |
1.98 |
2.44 |
2.93 |
3.45 |
4.00 |
4.56 |
500 |
0.53 |
0.80 |
1.12 |
1.49 |
1.91 |
2.36 |
2.84 |
3.35 |
3.89 |
4.45 |
750 |
0.49 |
0.74 |
1.06 |
1.42 |
1.82 |
2.26 |
2.74 |
3.24 |
3.77 |
4.32 |
1000 |
0.46 |
0.71 |
1.01 |
1.37 |
1.77 |
2.20 |
2.67 |
3.16 |
3.69 |
4.23 |
1500 |
0.43 |
0.66 |
0.96 |
1.30 |
1.69 |
2.11 |
2.57 |
3.06 |
3.57 |
4.11 |
2000 |
0.40 |
0.63 |
0.92 |
1.25 |
1.63 |
2.05 |
2.50 |
2.99 |
3.49 |
4.03 |
One data-based method for choosing the smoothing parameter is likelihood cross validation (Silverman, 1986, pp. 52–55). The cross validated density estimate at an observation is obtained by omitting the observation from the computations:
The (log) likelihood cross validation criterion is then computed as
The suggested smoothing parameter is the one that maximizes this criterion. With fixed-radius kernels, likelihood cross validation oversmooths long-tailed distributions; for purposes of clustering, it tends to undersmooth short-tailed distributions. With k-nearest-neighbor density estimation, likelihood cross validation is useless because it almost always indicates k=2.
Cascaded density estimates are obtained by computing initial kernel density estimates and then, at each observation, taking the arithmetic mean, harmonic mean, or sum of the initial density estimates of the observations within the neighborhood. The cascaded density estimates can, in turn, be cascaded, and so on. Let be the density estimate at cascaded k times. For all types of cascading, . If the cascading is done by arithmetic means, then, for ,
For harmonic means,
and for sums,
To avoid cluttering formulas, the symbol is used in the rest of the chapter to denote the density estimate at whether cascaded or not, since the clustering methods and significance tests do not depend on the degree of cascading.
Cascading increases the smoothness of the estimates with less computation than would be required by increasing the smoothing parameters to yield a comparable degree of smoothness. For population densities with bounded support and discontinuities at the boundaries, cascading improves estimates near the boundaries. Cascaded estimates, especially using sums, might be more sensitive to the local covariance structure of the distribution than are the uncascaded kernel estimates. Cascading seems to be useful for detecting very nonspherical clusters. Cascading was suggested by Tukey and Tukey (1981, p. 237). Additional research into the properties of cascaded density estimates is needed.