The FREQ Procedure

OUTPUT Statement

OUTPUT <OUT= SAS-data-set> output-options ;

The OUTPUT statement creates a SAS data set that contains statistics that are computed by PROC FREQ. Table 38.7 lists the statistics that can be stored in the output data set. You identify which statistics to include by specifying output-options.

You must use a TABLES statement with the OUTPUT statement. The OUTPUT statement stores statistics for only one table request. If you use multiple TABLES statements, the contents of the output data set correspond to the last TABLES statement. If you use multiple table requests in a single TABLES statement, the contents of the output data set correspond to the last table request. Only one OUTPUT statement is allowed in a single invocation of the procedure.

For a one-way or two-way table, the output data set contains one observation that stores the requested statistics for the table. For a multiway table, the output data set contains an observation for each two-way table (stratum) of the multiway crosstabulation. If you request summary statistics for the multiway table, the output data set also contains an observation that stores the across-strata summary statistics. If you use a BY statement, the output data set contains an observation or set of observations for each BY group. For more information about the contents of the output data set, see the section Contents of the OUTPUT Statement Output Data Set.

The output data set that is created by the OUTPUT statement is not the same as the output data set that is created by the OUT= option in the TABLES statement. The OUTPUT statement creates a data set that contains statistics (such as the Pearson chi-square and its p-value), and the OUT= option in the TABLES statement creates a data set that contains frequency table counts and percentages. See the section Output Data Sets for more information.

As an alternative to the OUTPUT statement, you can use the Output Delivery System (ODS) to store statistics that PROC FREQ computes. ODS can create a SAS data set from any table that PROC FREQ produces. See the section ODS Table Names for more information.

You can specify the following options in the OUTPUT statement:

OUT=SAS-data-set

specifies the name of the output data set. When you use an OUTPUT statement but do not use the OUT= option, PROC FREQ creates a data set and names it by using the DATAn convention.

output-options

specify the statistics to include in the output data set. Table 38.7 lists the output-options that are available in the OUTPUT statement, together with the TABLES statement options that are required to produce the statistics. Descriptions of the output-options follow the table in alphabetical order.

You can specify output-options to request individual statistics, or you can request groups of statistics by using output-options that are identical to the group options in the TABLES statement (for example, the CHISQ, MEASURES, CMH, AGREE, and ALL options).

When you specify an output-option, the output data set includes statistics from the corresponding analysis. In addition to the estimate or test statistic, the output data set includes associated values such as standard errors, confidence limits, p-values, and degrees of freedom. See the section Contents of the OUTPUT Statement Output Data Set for details.

To store a statistic in the output data set, you must also request computation of that statistic with the appropriate TABLES, EXACT, or TEST statement option. For example, the PCHI output-option includes the Pearson chi-square in the output data set. You must also request computation of the Pearson chi-square by specifying the CHISQ option in the TABLES statement. Or, if you use only one TABLES statement, you can request computation of the Pearson chi-square by specifying the PCHI or CHISQ option in the EXACT statement. Table 38.7 lists the TABLES statement options that are required to produce the OUTPUT data set statistics.

Table 38.7: OUTPUT Statement Output Options

Output Option

Output Data Set Statistics

Required TABLES Statement Option

AGREE

McNemar’s test ($2 \times 2$ tables), Bowker’s test,

AGREE

 

simple and weighted kappas; for multiple strata,

 
 

overall simple and weighted kappas, tests for equal

 
 

kappas, and Cochran’s Q ($h \times 2 \times 2$ tables)

 

AJCHI

Continuity-adjusted chi-square ($2 \times 2$ tables)

CHISQ

ALL

CHISQ, MEASURES, and CMH statistics;

ALL

 

N (number of nonmissing observations)

 

BDCHI | BD

Breslow-Day test ($h \times 2 \times 2$ tables)

CMH, CMH1, or CMH2

BINOMIAL

Binomial statistics (one-way tables)

BINOMIAL

CHISQ

For one-way tables, goodness-of-fit test;

CHISQ

 

for two-way tables, Pearson, likelihood ratio,

 
 

continuity-adjusted, and Mantel-Haenszel

 
 

chi-squares, Fisher’s exact test ($2 \times 2$ tables),

 
 

phi and contingency coefficients, Cramér’s V

 

CMH

Cochran-Mantel-Haenszel (CMH) correlation,

CMH

 

row mean scores (ANOVA), and general

 
 

association statistics; for $2 \times 2$ tables, logit

 
 

and Mantel-Haenszel common odds ratios

 
 

and relative risks, Breslow-Day test

 

CMH1

CMH statistics, except row mean scores (ANOVA)

CMH or CMH1

 

and general association statistics

 

CMH2

CMH statistics, except general association statistic

CMH or CMH2

CMHCOR

CMH correlation statistic

CMH, CMH1, or CMH2

CMHGA

CMH general association statistic

CMH

CMHRMS

CMH row mean scores (ANOVA) statistic

CMH or CMH2

COCHQ

Cochran’s Q ($h \times 2 \times 2$ tables)

AGREE

CONTGY

Contingency coefficient

CHISQ

CRAMV

Cramér’s V

CHISQ

EQKAP

Test for equal simple kappas

AGREE

EQOR | ZELEN

Zelen’s test for equal odds ratios ($h \times 2 \times 2$ tables)

CMH and EXACT EQOR

EQWKP

Test for equal weighted kappas

AGREE

FISHER

Fisher’s exact test

CHISQ or FISHER [a]

GAILSIMON | GS

Gail-Simon test

CMH(GAILSIMON)

GAMMA

Gamma

MEASURES

JT

Jonckheere-Terpstra test

JT

KAPPA

Simple kappa coefficient

AGREE

KENTB | TAUB

Kendall’s tau-b

MEASURES

LAMCR

Lambda asymmetric $(C|R)$

MEASURES

LAMDAS

Lambda symmetric

MEASURES

LAMRC

Lambda asymmetric $(R|C)$

MEASURES

LGOR

Logit common odds ratio

CMH, CMH1, or CMH2

LGRRC1

Logit common relative risk, column 1

CMH, CMH1, or CMH2

LGRRC2

Logit common relative risk, column 2

CMH, CMH1, or CMH2

LRCHI

Likelihood ratio chi-square

CHISQ

MCNEM

McNemar’s test ($2 \times 2$ tables)

AGREE

MEASURES

Gamma, Kendall’s tau-b, Stuart’s tau-c,

MEASURES

 

Somers’ $D (C|R)$ and $D (R|C)$, Pearson and

 
 

Spearman correlations, lambda asymmetric

 
 

$(C|R)$ and $(R|C)$, lambda symmetric,

 
 

uncertainty coefficients $(C|R)$ and $(R|C)$,

 
 

symmetric uncertainty coefficient;

 
 

odds ratio and relative risks ($2 \times 2$ tables)

 

MHCHI

Mantel-Haenszel chi-square

CHISQ

MHOR | COMOR

Mantel-Haenszel common odds ratio

CMH, CMH1, or CMH2

MHRRC1

Mantel-Haenszel common relative risk, column 1

CMH, CMH1, or CMH2

MHRRC2

Mantel-Haenszel common relative risk, column 2

CMH, CMH1, or CMH2

N

Number of nonmissing observations

 

NMISS

Number of missing observations

 

OR

Odds ratio ($2 \times 2$ tables)

MEASURES or RELRISK

PCHI

Chi-square goodness-of-fit test (one-way tables),

CHISQ

 

Pearson chi-square (two-way tables)

 

PCORR

Pearson correlation coefficient

MEASURES

PHI

Phi coefficient

CHISQ

PLCORR

Polychoric correlation coefficient

PLCORR

RDIF1

Column 1 risk difference (row 1 – row 2)

RISKDIFF

RDIF2

Column 2 risk difference (row 1 – row 2)

RISKDIFF

RELRISK

Odds ratio and relative risks ($2 \times 2$ tables)

MEASURES or RELRISK

RISKDIFF

Risks and risk differences ($2 \times 2$ tables)

RISKDIFF

RISKDIFF1

Risks and risk difference, column 1

RISKDIFF

RISKDIFF2

Risks and risk difference, column 2

RISKDIFF

RRC1 | RELRISK1

Relative risk, column 1

MEASURES or RELRISK

RRC2 | RELRISK2

Relative risk, column 2

MEASURES or RELRISK

RSK1 | RISK1

Column 1 overall risk

RISKDIFF

RSK11 | RISK11

Column 1 risk for row 1

RISKDIFF

RSK12 | RISK12

Column 2 risk for row 1

RISKDIFF

RSK2 | RISK2

Column 2 overall risk

RISKDIFF

RSK21 | RISK21

Column 1 risk for row 2

RISKDIFF

RSK22 | RISK22

Column 2 risk for row 2

RISKDIFF

SCORR

Spearman correlation coefficient

MEASURES

SMDCR

Somers’ $D (C|R)$

MEASURES

SMDRC

Somers’ $D (R|C)$

MEASURES

STUTC | TAUC

Stuart’s tau-c

MEASURES

TREND

Cochran-Armitage test for trend

TREND

TSYMM | BOWKER

Bowker’s test of symmetry

AGREE

U

Symmetric uncertainty coefficient

MEASURES

UCR

Uncertainty coefficient $(C|R)$

MEASURES

URC

Uncertainty coefficient $(R|C)$

MEASURES

WTKAP

Weighted kappa coefficient

AGREE

[a] CHISQ computes Fisher’s exact test for $2 \times 2$ tables. Use the FISHER option to compute Fisher’s exact test for general $r \times c$ tables.


You can specify the following output-options in the OUTPUT statement.

AGREE

includes the following tests and measures of agreement in the output data set: McNemar’s test (for $2 \times 2$ tables), Bowker’s test of symmetry, the simple kappa coefficient, and the weighted kappa coefficient. For multiway tables, the AGREE option also includes the following statistics in the output data set: overall simple and weighted kappa coefficients, tests for equal simple and weighted kappa coefficients, and Cochran’s Q test.

The AGREE option in the TABLES statement requests computation of tests and measures of agreement. See the section Tests and Measures of Agreement for details about these statistics.

AGREE statistics are computed only for square tables, where the number of rows equals the number of columns. PROC FREQ provides Bowker’s test of symmetry and weighted kappa coefficients only for tables larger than $2 \times 2$. (For $2 \times 2$ tables, Bowker’s test is identical to McNemar’s test, and the weighted kappa coefficient equals the simple kappa coefficient.) Cochran’s Q is available for multiway $2 \times 2$ tables.

AJCHI

includes the continuity-adjusted chi-square in the output data set. The continuity-adjusted chi-square is available for $2 \times 2$ tables and is provided by the CHISQ option in the TABLES statement. See the section Continuity-Adjusted Chi-Square Test for details.

ALL

includes all statistics that are requested by the CHISQ, MEASURES, and CMH output-options in the output data set. ALL also includes the number of nonmissing observations, which you can request individually by specifying the N output-option.

BDCHI | BD

includes the Breslow-Day test in the output data set. The Breslow-Day test for homogeneity of odds ratios is computed for multiway $2 \times 2$ tables and is provided by the CMH, CMH1, and CMH2 options in the TABLES statement. See the section Breslow-Day Test for Homogeneity of the Odds Ratios for details.

BINOMIAL

includes the binomial proportion estimate, confidence limits, and tests in the output data set. The BINOMIAL option in the TABLES statement requests computation of binomial statistics, which are available for one-way tables. See the section Binomial Proportion for details.

CHISQ

includes the following chi-square tests and measures in the output data set for two-way tables: Pearson chi-square, likelihood ratio chi-square, Mantel-Haenszel chi-square, phi coefficient, contingency coefficient, and Cramér’s V. For $2 \times 2$ tables, CHISQ also includes Fisher’s exact test and the continuity-adjusted chi-square in the output data set. See the section Chi-Square Tests and Statistics for details. For one-way tables, CHISQ includes the chi-square goodness-of-fit test in the output data set. See the section Chi-Square Test for One-Way Tables for details. The CHISQ option in the TABLES statement requests computation of these statistics.

If you specify the CHISQ(WARN=OUTPUT) option in the TABLES statement, the CHISQ option also includes the variable WARN_PCHI in the output data set. This variable indicates the validity warning for the asymptotic Pearson chi-square test.

CMH

includes the following Cochran-Mantel-Haenszel statistics in the output data set: correlation, row mean scores (ANOVA), and general association. For $2 \times 2$ tables, the CMH option also includes the Mantel-Haenszel and logit estimates of the common odds ratio and relative risks. For multiway (stratified) $2 \times 2$ tables, the CMH option includes the Breslow-Day test for homogeneity of odds ratios. The CMH option in the TABLES statement requests computation of these statistics. See the section Cochran-Mantel-Haenszel Statistics for details.

If you specify the CMH(MF) option in the TABLES statement, the CMH option includes the Mantel-Fleiss analysis in the output data set. The variables MF_CMH and WARN_CMH contain the Mantel-Fleiss criterion and the warning indicator, respectively.

CMH1

includes the CMH statistics in the output data set, with the exception of the row mean scores (ANOVA) statistic and the general association statistic. The CMH1 option in the TABLES statement requests computation of these statistics. See the section Cochran-Mantel-Haenszel Statistics for details.

CMH2

includes the CMH statistics in the output data set, with the exception of the general association statistic. The CMH2 option in the TABLES statement requests computation of these statistics. See the section Cochran-Mantel-Haenszel Statistics for details.

CMHCOR

includes the Cochran-Mantel-Haenszel correlation statistic in the output data set. The CMH option in the TABLES statement requests computation of this statistic. See the section Correlation Statistic for details.

CMHGA

includes the Cochran-Mantel-Haenszel general association statistic in the output data set. The CMH option in the TABLES statement requests computation of this statistic. See the section General Association Statistic for details.

CMHRMS

includes the Cochran-Mantel-Haenszel row mean scores (ANOVA) statistic in the output data set. The CMH option in the TABLES statement requests computation of this statistic. See the section ANOVA (Row Mean Scores) Statistic for details.

COCHQ

includes Cochran’s Q test in the output data set. The AGREE option in the TABLES statement requests computation of this test, which is available for multiway $2 \times 2$ tables. See the section Cochran’s Q Test for details.

CONTGY

includes the contingency coefficient in the output data set. The CHISQ option in the TABLES statement requests computation of the contingency coefficient. See the section Contingency Coefficient for details.

CRAMV

includes Cramér’s V in the output data set. The CHISQ option in the TABLES statement requests computation of Cramér’s V. See the section Cramér’s V for details.

EQKAP

includes the test for equal simple kappa coefficients in the output data set. The AGREE option in the TABLES statement requests computation of this test, which is available for multiway, square ($h \times r \times r$) tables. See the section Tests for Equal Kappa Coefficients for details.

EQOR | ZELEN

includes Zelen’s exact test for equal odds ratios in the output data set. The EQOR option in the EXACT statement requests computation of this test, which is available for multiway $2 \times 2$ tables. See the section Zelen’s Exact Test for Equal Odds Ratios for details.

EQWKP

includes the test for equal weighted kappa coefficients in the output data set. The AGREE option in the TABLES statement requests computation of this test. The test for equal weighted kappas is available for multiway, square ($h \times r \times r$) tables where r > 2. See the section Tests for Equal Kappa Coefficients for details.

FISHER

includes Fisher’s exact test in the output data set. For $2 \times 2$ tables, the CHISQ option in the TABLES statement provides Fisher’s exact test. For tables larger than $2 \times 2$, the FISHER option in the EXACT statement provides Fisher’s exact test. See the section Fisher’s Exact Test for details.

GAILSIMON | GS

includes the Gail-Simon test for qualitative interaction in the output data set. The CMH(GAILSIMON) option in the TABLES statement requests computation of this test. See the section Gail-Simon Test for Qualitative Interactions for details.

GAMMA

includes the gamma statistic in the output data set. The MEASURES option in the TABLES statement requests computation of the gamma statistic. See the section Gamma for details.

JT

includes the Jonckheere-Terpstra test in the output data set. The JT option in the TABLES statement requests the Jonckheere-Terpstra test. See the section Jonckheere-Terpstra Test for details.

KAPPA

includes the simple kappa coefficient in the output data set. The AGREE option in the TABLES statement requests computation of kappa, which is available for square tables (where the number of rows equals the number of columns). For multiway square tables, the KAPPA option also includes the overall kappa coefficient in the output data set. See the sections Simple Kappa Coefficient and Overall Kappa Coefficient for details.

KENTB | TAUB

includes Kendall’s tau-b in the output data set. The MEASURES option in the TABLES statement requests computation of Kendall’s tau-b. See the section Kendall’s Tau-b for details.

LAMCR

includes the asymmetric lambda $\lambda (C|R)$ in the output data set. The MEASURES option in the TABLES statement requests computation of lambda. See the section Lambda (Asymmetric) for details.

LAMDAS

includes the symmetric lambda in the output data set. The MEASURES option in the TABLES statement requests computation of lambda. See the section Lambda (Symmetric) for details.

LAMRC

includes the asymmetric lambda $\lambda (R|C)$ in the output data set. The MEASURES option in the TABLES statement requests computation of lambda. See the section Lambda (Asymmetric) for details.

LGOR

includes the logit estimate of the common odds ratio in the output data set. The CMH option in the TABLES statement requests computation of this statistic, which is available for $2 \times 2$ tables. See the section Adjusted Odds Ratio and Relative Risk Estimates for details.

LGRRC1

includes the logit estimate of the common relative risk (column 1) in the output data set. The CMH option in the TABLES statement requests computation of this statistic, which is available for $2 \times 2$ tables. See the section Adjusted Odds Ratio and Relative Risk Estimates for details.

LGRRC2

includes the logit estimate of the common relative risk (column 2) in the output data set. The CMH option in the TABLES statement requests computation of this statistic, which is available for $2 \times 2$ tables. See the section Adjusted Odds Ratio and Relative Risk Estimates for details.

LRCHI

includes the likelihood ratio chi-square in the output data set. The CHISQ option in the TABLES statement requests computation of the likelihood ratio chi-square. See the section Likelihood Ratio Chi-Square Test for details.

MCNEM

includes McNemar’s test (for $2 \times 2$ tables) in the output data set. The AGREE option in the TABLES statement requests computation of McNemar’s test. See the section McNemar’s Test for details.

MEASURES

includes the following measures of association in the output data set: gamma, Kendall’s tau-b, Stuart’s tau-c, Somers’ $D (C|R)$, Somers’ $D (R|C)$, Pearson and Spearman correlation coefficients, lambda (symmetric and asymmetric), and uncertainty coefficients (symmetric and asymmetric). For $2 \times 2$ tables, the MEASURES option also includes the odds ratio, column 1 relative risk, and column 2 relative risk. The MEASURES option in the TABLES statement requests computation of these statistics. See the section Measures of Association for details.

MHCHI

includes the Mantel-Haenszel chi-square in the output data set. The CHISQ option in the TABLES statement requests computation of the Mantel-Haenszel chi-square. See the section Mantel-Haenszel Chi-Square Test for details.

MHOR | COMOR

includes the Mantel-Haenszel estimate of the common odds ratio in the output data set. The CMH option in the TABLES statement requests computation of this statistic, which is available for $2 \times 2$ tables. See the section Adjusted Odds Ratio and Relative Risk Estimates for details.

MHRRC1

includes the Mantel-Haenszel estimate of the common relative risk (column 1) in the output data set. The CMH option in the TABLES statement requests computation of this statistic, which is available for $2 \times 2$ tables. See the section Adjusted Odds Ratio and Relative Risk Estimates for details.

MHRRC2

includes the Mantel-Haenszel estimate of the common relative risk (column 2) in the output data set. The CMH option in the TABLES statement requests computation of this statistic, which is available for $2 \times 2$ tables. See the section Adjusted Odds Ratio and Relative Risk Estimates for details.

N

includes the number of nonmissing observations in the output data set.

NMISS

includes the number of missing observations in the output data set. See the section Missing Values for details about how PROC FREQ handles missing values.

OR

includes the odds ratio (for $2 \times 2$ tables) in the output data set. The MEASURES and RELRISK options in the TABLES statement request this statistic. See the section Odds Ratio and Relative Risks for 2 x 2 Tables for details.

PCHI

includes the Pearson chi-square in the output data set for two-way tables. See the section Pearson Chi-Square Test for Two-Way Tables for details. For one-way tables, the PCHI option includes the chi-square goodness-of-fit test in the output data set. See the section Chi-Square Test for One-Way Tables for details. The CHISQ option in the TABLES statement requests computation of these statistics.

If you specify the CHISQ(WARN=OUTPUT) option in the TABLES statement, the PCHI option also includes the variable WARN_PCHI in the output data set. This variable indicates the validity warning for the asymptotic Pearson chi-square test.

PCORR

includes the Pearson correlation coefficient in the output data set. The MEASURES option in the TABLES statement requests computation of the Pearson correlation. See the section Pearson Correlation Coefficient for details.

PHI

includes the phi coefficient in the output data set. The CHISQ option in the TABLES statement requests computation of the phi coefficient. See the section Phi Coefficient for details.

PLCORR

includes the polychoric correlation coefficient in the output data set. For $2 \times 2$ tables, this statistic is known as the tetrachoric correlation coefficient. The PLCORR option in the TABLES statement requests computation of the polychoric correlation. See the section Polychoric Correlation for details.

RDIF1

includes the column 1 risk difference (row 1 – row 2) in the output data set. The RISKDIFF option in the TABLES statement requests computation of risks and risk differences, which are available for $2 \times 2$ tables. See the section Risks and Risk Differences for details.

RDIF2

includes the column 2 risk difference (row 1 – row 2) in the output data set. The RISKDIFF option in the TABLES statement requests computation of risks and risk differences, which are available for $2 \times 2$ tables. See the section Risks and Risk Differences for details.

RELRISK

includes the column 1 and column 2 relative risks (for $2 \times 2$ tables) in the output data set. The MEASURES and RELRISK options in the TABLES statement request these statistics. See the section Odds Ratio and Relative Risks for 2 x 2 Tables for details.

RISKDIFF

includes risks (binomial proportions) and risk differences for $2 \times 2$ tables in the output data set. These statistics include the row 1 risk, row 2 risk, total (overall) risk, and risk difference (row 1 – row 2) for column 1 and column 2. The RISKDIFF option in the TABLES statement requests computation of these statistics. See the section Risks and Risk Differences for details.

RISKDIFF1

includes column 1 risks (binomial proportions) and risk differences for $2 \times 2$ tables in the output data set. These statistics include the row 1 risk, row 2 risk, total (overall) risk, and risk difference (row 1 – row 2). The RISKDIFF option in the TABLES statement requests computation of these statistics. See the section Risks and Risk Differences for details.

RISKDIFF2

includes column 2 risks (binomial proportions) and risk differences for $2 \times 2$ tables in the output data set. These statistics include the row 1 risk, row 2 risk, total (overall) risk, and risk difference (row 1 – row 2). The RISKDIFF option in the TABLES statement requests computation of these statistics. See the section Risks and Risk Differences for details.

RRC1 | RELRISK1

includes the column 1 relative risk in the output data set. The MEASURES and RELRISK options in the TABLES statement request relative risks, which are available for $2 \times 2$ tables. See the section Odds Ratio and Relative Risks for 2 x 2 Tables for details.

RRC2 | RELRISK2

includes the column 2 relative risk in the output data set. The MEASURES and RELRISK options in the TABLES statement request relative risks, which are available for $2 \times 2$ tables. See the section Odds Ratio and Relative Risks for 2 x 2 Tables for details.

RSK1 | RISK1

includes the overall column 1 risk in the output data set. The RISKDIFF option in the TABLES statement requests computation of risks and risk differences, which are available for $2 \times 2$ tables. See the section Risks and Risk Differences for details.

RSK11 | RISK11

includes the column 1 risk for row 1 in the output data set. The RISKDIFF option in the TABLES statement requests computation of risks and risk differences, which are available for $2 \times 2$ tables. See the section Risks and Risk Differences for details.

RSK12 | RISK12

includes the column 2 risk for row 1 in the output data set. The RISKDIFF option in the TABLES statement requests computation of risks and risk differences, which are available for $2 \times 2$ tables. See the section Risks and Risk Differences for details.

RSK2 | RISK2

includes the overall column 2 risk in the output data set. The RISKDIFF option in the TABLES statement requests computation of risks and risk differences. See the section Risks and Risk Differences for details.

RSK21 | RISK21

includes the column 1 risk for row 2 in the output data set. The RISKDIFF option in the TABLES statement requests computation of risks and risk differences, which are available for $2 \times 2$ tables. See the section Risks and Risk Differences for details.

RSK22 | RISK22

includes the column 2 risk for row 2 in the output data set. The RISKDIFF option in the TABLES statement requests computation of risks and risk differences, which are available for $2 \times 2$ tables. See the section Risks and Risk Differences for details.

SCORR

includes the Spearman correlation coefficient in the output data set. The MEASURES option in the TABLES statement requests computation of the Spearman correlation. See the section Spearman Rank Correlation Coefficient for details.

SMDCR

includes Somers’ $D (C|R)$ in the output data set. The MEASURES option in the TABLES statement requests computation of Somers’ D. See the section Somers’ D for details.

SMDRC

includes Somers’ $D (R|C)$ in the output data set. The MEASURES option in the TABLES statement requests computation of Somers’ D. See the section Somers’ D for details.

STUTC | TAUC

includes Stuart’s tau-c in the output data set. The MEASURES option in the TABLES statement requests computation of tau-c. See the section Stuart’s Tau-c for details.

TREND

includes the Cochran-Armitage test for trend in the output data set. The TREND option in the TABLES statement requests computation of the trend test. This test is available for tables of dimension $2 \times C$ or $R \times 2$. See the section Cochran-Armitage Test for Trend for details.

TSYMM | BOWKER

includes Bowker’s test of symmetry in the output data set. The AGREE option in the TABLES statement requests computation of Bowker’s test. See the section Bowker’s Test of Symmetry for details.

U

includes the uncertainty coefficient (symmetric) in the output data set. The MEASURES option in the TABLES statement requests computation of the uncertainty coefficient. See the section Uncertainty Coefficient (Symmetric) for details.

UCR

includes the asymmetric uncertainty coefficient $U (C|R)$ in the output data set. The MEASURES option in the TABLES statement requests computation of the uncertainty coefficient. See the section Uncertainty Coefficients (Asymmetric) for details.

URC

includes the asymmetric uncertainty coefficient $U (R|C)$ in the output data set. The MEASURES option in the TABLES statement requests computation of the uncertainty coefficient. See the section Uncertainty Coefficients (Asymmetric) for details.

WTKAP

includes the weighted kappa coefficient in the output data set. The AGREE option in the TABLES statement requests computation of weighted kappa, which is available for square tables larger than $2 \times 2$. For multiway tables, the WTKAP option also includes the overall weighted kappa coefficient in the output data set. See the sections Weighted Kappa Coefficient and Overall Kappa Coefficient for details.