Previous Page | Next Page

Robust Regression Examples

Example 12.4 Brainlog Data

The following data are the body weights (in kilograms) and brain weights (in grams) of animals as reported by Jerison (1973) and as analyzed in Rousseeuw and Leroy (1987). Instead of the original data, the following example uses the logarithms of the measurements of the two variables.

title "*** Brainlog Data: Do MCD, MVE ***";
aa={ 1.303338E-001  9.084851E-001 ,
     2.6674530         2.6263400  ,
     1.5602650         2.0773680  ,
     1.4418520         2.0606980  ,
  1.703332E-002     7.403627E-001 ,
     4.0681860         1.6989700  ,
     3.4060290         3.6630410  ,
     2.2720740         2.6222140  ,
     2.7168380         2.8162410  ,
     1.0000000         2.0606980  ,
  5.185139E-001        1.4082400  ,
     2.7234560         2.8325090  ,
     2.3159700         2.6085260  ,
     1.7923920         3.1205740  ,
     3.8230830         3.7567880  ,
     3.9731280         1.8450980  ,
  8.325089E-001        2.2528530  ,
     1.5440680         1.7481880  ,
 -9.208187E-001         .0000000  ,
    -1.6382720     -3.979400E-001 ,
  3.979400E-001        1.0827850  ,
     1.7442930         2.2430380  ,
     2.0000000         2.1959000  ,
     1.7173380         2.6434530  ,
     4.9395190         2.1889280  ,
 -5.528420E-001     2.787536E-001 ,
 -9.136401E-001     4.771213E-001 ,
     2.2833010         2.2552720  };

By default, the MVE subroutine uses only 1500 randomly selected subsets rather than all subsets. The following specification of the options vector requires that all 3276 subsets of 3 cases out of 28 cases are generated and evaluated:

title2 "***MVE for BrainLog Data***";
title3 "*** Use All Subsets***";
optn = j(9,1,.);
optn[1]= 3;              /* ipri */
optn[2]= 1;              /* pcov: print COV */
optn[3]= 1;              /* pcor: print CORR */
optn[5]= -1;             /* nrep: all subsets */

call mve(sc,xmve,dist,optn,aa);

Specifying OPTN[1]=3, OPTN[2]=1, and OPTN[3]=1 requests that all output be printed. Output 12.4.1 shows the classical scatter and correlation matrix.

Output 12.4.1 Some Simple Statistics
*** Brainlog Data: Do MCD, MVE ***
***MVE for BrainLog Data***
*** Use All Subsets***

Classical Covariance Matrix
  VAR1 VAR2
VAR1 2.6816512357 1.3300846932
VAR2 1.3300846932 1.0857537552

Classical Correlation Matrix
  VAR1 VAR2
VAR1 1 0.7794934643
VAR2 0.7794934643 1

Classical Mean
VAR1 1.6378572186
VAR2 1.9219465964

Output 12.4.2 shows the results of the combinatoric optimization (complete subset sampling).

Output 12.4.2 Iteration History for MVE
Subset Singular Best
Criterion
Percent
819 0 0.439709 25
1638 0 0.439709 50
2457 0 0.439709 75
3276 0 0.439709 100

Observations of Best Subset
1 22 28

Initial MVE Location
Estimates
VAR1 1.3859759333
VAR2 1.8022650333

Initial MVE Scatter Matrix
  VAR1 VAR2
VAR1 4.9018525125 3.2937139101
VAR2 3.2937139101 2.3400650932

Output 12.4.3 shows the optimization results after local improvement.

Output 12.4.3 Table of MVE Results
Robust MVE Location Estimates
VAR1 1.29528238
VAR2 1.8733722792

Robust MVE Scatter Matrix
  VAR1 VAR2
VAR1 2.0566592937 1.5290250167
VAR2 1.5290250167 1.2041353589

Eigenvalues of Robust
Scatter Matrix
VAR1 3.2177274012
VAR2 0.0430672514

Robust Correlation Matrix
  VAR1 VAR2
VAR1 1 0.9716184659
VAR2 0.9716184659 1

Output 12.4.4 presents a table that contains the classical Mahalanobis distances, the robust distances, and the weights identifying the outlier observations.

Output 12.4.4 Mahalanobis and Robust Distances
Classical Distances and Robust (Rousseeuw) Distances
Unsquared Mahalanobis Distance and
Unsquared Rousseeuw Distance of Each Observation
N Mahalanobis Distances Robust Distances Weight
1 1.006591 0.897076 1.000000
2 0.695261 1.405302 1.000000
3 0.300831 0.186726 1.000000
4 0.380817 0.318701 1.000000
5 1.146485 1.135697 1.000000
6 2.644176 8.828036 0
7 1.708334 1.699233 1.000000
8 0.706522 0.686680 1.000000
9 0.858404 1.084163 1.000000
10 0.798698 1.580835 1.000000
11 0.686485 0.693346 1.000000
12 0.874349 1.071492 1.000000
13 0.677791 0.717545 1.000000
14 1.721526 3.398698 0
15 1.761947 1.762703 1.000000
16 2.369473 7.999472 0
17 1.222253 2.805954 0
18 0.203178 1.207332 1.000000
19 1.855201 1.773317 1.000000
20 2.266268 2.074971 1.000000
21 0.831416 0.785954 1.000000
22 0.416158 0.342200 1.000000
23 0.264182 0.918383 1.000000
24 1.046120 1.782334 1.000000
25 2.911101 9.565443 0
26 1.586458 1.543748 1.000000
27 1.582124 1.808423 1.000000
28 0.394664 1.523235 1.000000

Again, you can call the subroutine SCATMVE(), which is included in the sample library in the file robustmc.sas, to plot the classical and robust confidence ellipsoids, as follows:

optn = j(9,1,.); optn[5]= -1;
vnam = { "Log Body Wgt","Log Brain Wgt" };
filn = "brlmve";
titl = "BrainLog Data: MVE Use All Subsets";
%include 'robustmc.sas';
call scatmve(2,optn,.9,aa,vnam,titl,1,filn);

The plot is shown in Figure 12.4.5.

Output 12.4.5 BrainLog Data: Classical and Robust Ellipsoid(MVE)
BrainLog Data: Classical and Robust Ellipsoid(MVE)

MCD is another subroutine that can be used to compute the robust location and the robust covariance of multivariate data sets. Here is the code:

title "*** Brainlog Data: Do MCD, MVE ***";
aa={ 1.303338E-001  9.084851E-001 ,
     2.6674530         2.6263400  ,
     1.5602650         2.0773680  ,
     1.4418520         2.0606980  ,
  1.703332E-002     7.403627E-001 ,
     4.0681860         1.6989700  ,
     3.4060290         3.6630410  ,
     2.2720740         2.6222140  ,
     2.7168380         2.8162410  ,
     1.0000000         2.0606980  ,
  5.185139E-001        1.4082400  ,
     2.7234560         2.8325090  ,
     2.3159700         2.6085260  ,
     1.7923920         3.1205740  ,
     3.8230830         3.7567880  ,
     3.9731280         1.8450980  ,
  8.325089E-001        2.2528530  ,
     1.5440680         1.7481880  ,
 -9.208187E-001         .0000000  ,
    -1.6382720     -3.979400E-001 ,
  3.979400E-001        1.0827850  ,
     1.7442930         2.2430380  ,
     2.0000000         2.1959000  ,
     1.7173380         2.6434530  ,
     4.9395190         2.1889280  ,
 -5.528420E-001     2.787536E-001 ,
 -9.136401E-001     4.771213E-001 ,
     2.2833010         2.2552720  };
title2 "***MCD for BrainLog Data***";
title3 "*** Use 500 Random Subsets***";
optn = j(9,1,.);
optn[1]= 3;              /* ipri */
optn[2]= 1;              /* pcov: print COV  */
optn[3]= 1;              /* pcor: print CORR */

call mcd(sc,xmve,dist,optn,aa);

Similarly, specifying OPTN[1]=3, OPTN[2]=1, and OPTN[3]=1 requests that all output be printed.

Output 12.4.6 shows the results of the optimization.

Output 12.4.6 Results of the Optimization
*** Brainlog Data: Do MCD, MVE ***
***MCD for BrainLog Data***
*** Use 500 Random Subsets***

1 2 3 4 5 8 9 11 12 13 18 21 22 23 28

MCD Location Estimate
VAR1 VAR2
1.622226068 2.0150777867

MCD Scatter Matrix Estimate
  VAR1 VAR2
VAR1 0.8973945995 0.6424456706
VAR2 0.6424456706 0.4793505736

Output 12.4.7 shows the reweighted results after removing outliers.

Output 12.4.7 Final Reweighted MCD Results
Reweighted Location Estimate
VAR1 VAR2
1.3154029661 1.8568731174

Reweighted Scatter Matrix
  VAR1 VAR2
VAR1 2.139986054 1.6068556533
VAR2 1.6068556533 1.2520384784

Eigenvalues
VAR1 VAR2
3.363074897 0.0289496354

Reweighted Correlation Matrix
  VAR1 VAR2
VAR1 1 0.9816633012
VAR2 0.9816633012 1

Output 12.4.8 presents a table that contains the classical Mahalanobis distances, the robust distances, and the weights identifying the outlier observations.

Output 12.4.8 Mahalanobis and Robust Distances (MCD)
Classical Distances and Robust (Rousseeuw) Distances
Unsquared Mahalanobis Distance and
Unsquared Rousseeuw Distance of Each Observation
N Mahalanobis Distances Robust Distances Weight
1 1.006591 0.855347 1.000000
2 0.695261 1.477050 1.000000
3 0.300831 0.239828 1.000000
4 0.380817 0.517719 1.000000
5 1.146485 1.108362 1.000000
6 2.644176 10.599341 0
7 1.708334 1.808455 1.000000
8 0.706522 0.690099 1.000000
9 0.858404 1.052423 1.000000
10 0.798698 2.077131 1.000000
11 0.686485 0.888545 1.000000
12 0.874349 1.035824 1.000000
13 0.677791 0.683978 1.000000
14 1.721526 4.257963 0
15 1.761947 1.716065 1.000000
16 2.369473 9.584992 0
17 1.222253 3.571700 0
18 0.203178 1.323783 1.000000
19 1.855201 1.741064 1.000000
20 2.266268 2.026528 1.000000
21 0.831416 0.743545 1.000000
22 0.416158 0.419923 1.000000
23 0.264182 0.944610 1.000000
24 1.046120 2.289334 1.000000
25 2.911101 11.471953 0
26 1.586458 1.518721 1.000000
27 1.582124 2.054593 1.000000
28 0.394664 1.675651 1.000000

You can call the subroutine SCATMCD(), which is included in the sample library in file robustmc.sas, to plot the classical and robust confidence ellipsoids. Here is the code:

optn = j(9,1,.); optn[5]= -1;
vnam = { "Log Body Wgt","Log Brain Wgt" };
filn = "brlmcd";
titl = "BrainLog Data: MCD";
%include 'robustmc.sas';
call scatmcd(2,optn,.9,aa,vnam,titl,1,filn);

The plot is shown in Figure 12.4.9.

Output 12.4.9 BrainLog Data: Classical and Robust Ellipsoid (MCD)
BrainLog Data: Classical and Robust Ellipsoid (MCD)

Previous Page | Next Page | Top of Page